NETGEAR SC101 manual Viewing and Accessing Drives, Troubleshooting Tips

Page 3

Viewing and Accessing Drives

Troubleshooting Tips

Problem

Solution

SC101 drives disappear from the

Detach and reattach the drives from the SC101,

network

 

 

or

 

Restart the network as described in "When using the

 

SC101, restart your network in this order".

A shared drive attached with one

This doesn't happen automatically. Use the "Attach Drive"

computer does not show on other

feature on each computer to attach the drive to it.

computers.

 

SC101 occasionally drops off

To maintain a wireless connection, a small amount of data

wireless network

throughput must be available. The SC101 may drop off

 

when operating at the extreme limits of wireless range.

 

NETGEAR may release firmware shortly which needs even

 

less throughput.

Windows Disk Management Unallocated Partitions

This section explains what to do if you have created partitions with the SC101, but they show the unallocated partition attribute in Windows Disk Manager.

Use the Windows Disk Management Utility to work around an unallocated partition. Review the following procedure and be sure to follow these steps exactly as they are listed below. This procedure is not a fix.

To use Windows Disk Management Utility for the Unallocated Partition workaround

1.Click Start->Run. Type diskmgmt.msc and click OK.

2.This command launches the Windows Disk Management Utility which should look like the screenshot below. If your disk is “Basic” then proceed to Step 4. If your disk is “Unknown” then continue to Step 3.

3

Page 2 Page 4
Image 3
Page 2 Page 4
Contents Netgear SC101 Revised Troubleshooting Guide Page Viewing and Accessing Drives Troubleshooting TipsWindows Disk Management Unallocated Partitions Page Page Page Cannot See Partition Old Firmware Problem Click Attach Drive If a partition has never been seen on a particular computerCannot Create a Mirror PrerequisitesIii. Click Attach Drive Check LED Lights URL Link Light Light State What It Means What You Should Do LED IndicatorsHardware Link or FritzBox RoutersDefragmenting LAN ConnectionHard Disk Problem Action Hard Disk Problems and Drive ErrorsSCM Software SCM InstallationSolution To customize font settingsError Message Meaning and Action Error MessagesNo Central Storage Action Device was Found No Central Storage Device was Found in SmartWizardNo Central Storage Device was Found Action SmartSync Pro Activation Error SymptomsCause Symptom Error Drive attachment failed when Attach Partition FailsAbout the SC101 System RequirementsHeat and the SC101 How does heat affect the Storage Central performance? SC101 PerformanceSelf-certifying File System SFS New Technology File System NtfsSAN and Network Attached Storage NAS Type ut listall, then Enter SC101 Command Line Interface CLI for Advanced UsersUsing CLI Commands Type cd c\Program Files\NETGEAR\SC101Unique Name Fixing Corrupted Characters Command utfull getpart00 00 00 00 00 00 00 00 01 00 01 00 00 00 0A 00 00 00 00 00 00 00 00 02 00 02 00 00 00 0AType sc config ftsata2 start= disabled To disable the Promise drivers and install the SCM UtilityType cd C\Program Files\NETGEAR\SC101 Manager Utility Data recovery with SFSExtract.exeRemoving an Unusable Drive with ut.exe To remove an unusable drive from the SC101Type SFSExtract Single drive target
Related manuals
Manual 2 pages 44.73 Kb Manual 54 pages 17.75 Kb

SC101 specifications

The NETGEAR SC101 is a network-attached storage (NAS) device designed to simplify data storage and sharing within a home or small office environment. It provides an efficient solution for users looking to centralize their files, making them accessible from multiple devices connected to the same network.

One of the main features of the SC101 is its user-friendly interface that allows for easy setup and administration. It supports Windows, Mac OS, and Linux operating systems, ensuring compatibility with a wide range of devices. This versatility makes it an attractive choice for households and small businesses that utilize different systems. The SC101 also implements a simple drag-and-drop file management system, enabling users to effortlessly store and retrieve their data.

The device is built with two bays, accommodating standard hard drives that can be customized based on the user's storage needs. This flexibility enables users to start with a single drive and expand their storage capabilities as required. The SC101 supports both RAID 0 and RAID 1 configurations, allowing for a balance between performance and data redundancy. RAID 0 offers enhanced speed, while RAID 1 mirrors data, providing a level of protection against drive failures.

Connectivity is another highlight of the SC101. It features an Ethernet port that connects to the network, with support for various protocols including TCP/IP and UDP. Users can access their files from any computer on the network or even remotely, providing enhanced accessibility for team collaboration or personal use. The built-in web-based management interface also enables users to manage user accounts and permissions, ensuring security and controlled access to data.

In terms of performance, the SC101 utilizes a 480 MHz processor and 64 MB of RAM, which helps in delivering satisfactory performance for file transfers. While it may not compete with modern storage solutions or high-speed drives, it facilitates efficient data retrieval suitable for home and office environments.

Overall, the NETGEAR SC101 is a practical NAS solution that combines central file storage, easy management, and essential data protection features. Its compatibility with various operating systems, support for RAID configurations, and user-friendly setup make it a solid choice for users seeking to enhance their data storage capabilities without the complexity often associated with high-end NAS systems.
Top Page Image Contents