NETGEAR SC101 manual Cannot Create a Mirror, Prerequisites, Iii. Click Attach Drive

Page 9

ii.Enter the password for the partition/drive.

Leave it blank if you did not set a password. The password in this step is the password for a one particular partition. This is NOT the password for the whole disk, which is defaulted to the word "password".

iii.Click Attach Drive.

iv.If you enter the wrong drive password, a message "Incorrect password" appears. Highlight the partition, and reenter the correct password. If you forget the password, you can reset it to blank by clicking Reset Drive Password. If you do this, you are asked for the SC101 administrative password — be aware that you cannot cancel out of this screen, and if you click Exit, the Wizard will close, and you'll have to repeat the above steps. Once the partition is successfully attached to a computer, it disappears from the list of attachable partitions.

6.If the partition appears on the Broken Drive screen then the partition is broken (for example, a broken mirror if one disk is removed) and needs to be removed using the "Delete Broken Drive" button on that screen.

7.If the partition still does not show in either the "Manage Drive", "Attach Drive" or "Broken Drive" screens, then there are two methods to resolve it, the first method is easiest and safest.

oMethod 1: Uninstall the SCM, then reinstall it. All partitions will need to be reattached again.

oMethod 2: Alternatively, edit the Windows registry. Don't do this unless you have experience registry editing. Mistakes can cause the operating system to stop working.

oMicrosoft explains the purpose of the registry in this article.

oIt's advised to back up the registry before changing it manually. The process is described in this Microsoft article.

oNETGEAR IS NOT RESPONSIBLE FOR PROBLEMS CAUSED BY EDITING THE REGISTRY !

a.Start the registry editor.

b.Select HKEY_LOCAL_MACHINE\Software\ZNS\Client. There should be multiple sub-entries under Client.

c.Highlight the sub-entry in the left pane which shows in the right pane the name of the missing partition as "UserDefinedString" and click Delete.

d.Confirm to remove this key ( Make sure you do not delete the Client key itself, only the sub-key with the missing partition name)

e.Quit the registry editor.

f.Reboot the computer. The partition now shows in the "Attach Drive" screen.

g.Attach the partition again.

Cannot Create a Mirror

Prerequisites

∙The SC101 has two disk drives installed.

9

Page 8 Page 10
Image 9
Page 8 Page 10
Contents Netgear SC101 Revised Troubleshooting Guide Page Viewing and Accessing Drives Troubleshooting TipsWindows Disk Management Unallocated Partitions Page Page Page Cannot See Partition Old Firmware Problem Click Attach Drive If a partition has never been seen on a particular computerCannot Create a Mirror PrerequisitesIii. Click Attach Drive Check LED Lights URL Link Hardware LED IndicatorsLink or FritzBox Routers Light Light State What It Means What You Should DoDefragmenting LAN ConnectionHard Disk Problem Action Hard Disk Problems and Drive ErrorsSolution SCM InstallationTo customize font settings SCM SoftwareError Message Meaning and Action Error MessagesNo Central Storage Action Device was Found No Central Storage Device was Found in SmartWizardNo Central Storage Device was Found Action SmartSync Pro Activation Error SymptomsCause Symptom Error Drive attachment failed when Attach Partition FailsAbout the SC101 System RequirementsHeat and the SC101 How does heat affect the Storage Central performance? SC101 PerformanceSelf-certifying File System SFS New Technology File System NtfsSAN and Network Attached Storage NAS Using CLI Commands SC101 Command Line Interface CLI for Advanced UsersType cd c\Program Files\NETGEAR\SC101 Type ut listall, then EnterUnique Name Fixing Corrupted Characters Command utfull getpart00 00 00 00 00 00 00 00 01 00 01 00 00 00 0A 00 00 00 00 00 00 00 00 02 00 02 00 00 00 0AType sc config ftsata2 start= disabled To disable the Promise drivers and install the SCM UtilityRemoving an Unusable Drive with ut.exe Data recovery with SFSExtract.exeTo remove an unusable drive from the SC101 Type cd C\Program Files\NETGEAR\SC101 Manager UtilityType SFSExtract Single drive target
Related manuals
Manual 2 pages 44.73 Kb Manual 54 pages 17.75 Kb

SC101 specifications

The NETGEAR SC101 is a network-attached storage (NAS) device designed to simplify data storage and sharing within a home or small office environment. It provides an efficient solution for users looking to centralize their files, making them accessible from multiple devices connected to the same network.

One of the main features of the SC101 is its user-friendly interface that allows for easy setup and administration. It supports Windows, Mac OS, and Linux operating systems, ensuring compatibility with a wide range of devices. This versatility makes it an attractive choice for households and small businesses that utilize different systems. The SC101 also implements a simple drag-and-drop file management system, enabling users to effortlessly store and retrieve their data.

The device is built with two bays, accommodating standard hard drives that can be customized based on the user's storage needs. This flexibility enables users to start with a single drive and expand their storage capabilities as required. The SC101 supports both RAID 0 and RAID 1 configurations, allowing for a balance between performance and data redundancy. RAID 0 offers enhanced speed, while RAID 1 mirrors data, providing a level of protection against drive failures.

Connectivity is another highlight of the SC101. It features an Ethernet port that connects to the network, with support for various protocols including TCP/IP and UDP. Users can access their files from any computer on the network or even remotely, providing enhanced accessibility for team collaboration or personal use. The built-in web-based management interface also enables users to manage user accounts and permissions, ensuring security and controlled access to data.

In terms of performance, the SC101 utilizes a 480 MHz processor and 64 MB of RAM, which helps in delivering satisfactory performance for file transfers. While it may not compete with modern storage solutions or high-speed drives, it facilitates efficient data retrieval suitable for home and office environments.

Overall, the NETGEAR SC101 is a practical NAS solution that combines central file storage, easy management, and essential data protection features. Its compatibility with various operating systems, support for RAID configurations, and user-friendly setup make it a solid choice for users seeking to enhance their data storage capabilities without the complexity often associated with high-end NAS systems.
Top Page Image Contents