NETGEAR DG814 DSL manual Dynamic DNS, Respond to Ping on Internet WAN Port

Page 74

Reference Manual for the Model DG814 DSL Modem Internet Gateway

Respond to Ping on Internet WAN Port

If you want the gateway to respond to a 'ping' from the Internet, click the ‘Respond to Ping on Internet WAN Port’ check box. This should only be used as a diagnostic tool, since it allows your gateway to be discovered. Don't check this box unless you have a specific reason to do so.

Dynamic DNS

If your network has a permanently assigned IP address, you can register a domain name and have that name linked with your IP address by public Domain Name Servers (DNS). However, if your Internet account uses a dynamically assigned IP address, you will not know in advance what your IP address will be, and the address can change frequently. In this case, you can use a commercial dynamic DNS service, who will allow you to register your domain to their IP address, and will forward traffic directed at your domain to your frequently-changing IP address.

The gateway contains a client that can connect to many popular dynamic DNS services. You can select one of these services and obtain an account with them. Then, whenever your ISP-assigned IP address changes, your gateway will automatically contact your dynamic DNS service provider, log in to your account, and register your new IP address.

From the Main Menu of the browser interface, under Advanced, click on Dynamic DNS. To configure Dynamic DNS:

1.Access the website of one of the dynamic DNS service providers whose names appear in the ‘Select Service Provider’ box, and register for an account.

For example, for dyndns.org, go to www.dyndns.org.

2.Select the Use a dynamic DNS service check box.

3.Select the name of your dynamic DNS Service Provider.

4.Type the Host Name that your dynamic DNS service provider gave you. The dynamic DNS service provider may call this the domain name.

5.Type the User Name for your dynamic DNS account.

6.Type the Password (or key) for your dynamic DNS account.

7.If your dynamic DNS provider allows the use of wildcards in resolving your URL, you may select the Use wildcards check box to activate this feature.

For example, the wildcard feature will cause *.yourhost.dyndns.org to be aliased to the same IP address as yourhost.dyndns.org

7-6

Advanced Configuration of the Gateway

Image 74
Contents NETGEAR, Inc Trademarks World Wide Web Page Contents Chapter Preparing Your Network Chapter Maintenance Appendix a Technical Specifications Figure B-1 Page Table B-1 Xii About This Guide Technical Support Related PublicationsXiv About This Guide Typographical Conventions Special Message FormatsPage About the Gateway Key FeaturesChapter Introduction Introduction Autosensing 10/100 Ethernet Content FilteringSecurity Easy Installation and Management TCP/IPMaintenance and Support Introduction Chapter Setting Up the Hardware Package ContentsGateway’s Front Panel Access RequirementLocal Network Hardware Requirements PC RequirementsGateway’s Rear Panel LED DescriptionsConnecting the Gateway Connecting to your Local Ethernet Network Typical installationConnecting to Your Adsl Service and Telephone Provider Adsl through a modular RJ-11 wall jackAdsl through other wall jacks Connecting the Power AdapterVerifying Power Setting Up the Hardware Chapter Preparing Your Network Preparing Your Personal Computers for IP NetworkingConfiguring Windows 95, 98, and ME for IP Networking Install or Verify Windows Networking ComponentsPreparing Your Network Assign TCP/IP configuration by Dhcp Selecting Internet Access MethodConfiguring Windows NT or 2000 for IP Networking Verifying TCP/IP Properties WindowsMacOS 8.6 or Configuring the Macintosh for IP NetworkingVerifying TCP/IP Properties MacOS Your Internet Account Verifying TCP/IP Properties MacintoshLogin Protocols Account InformationObtaining ISP Configuration Information Windows Restarting the Network Ready for ConfigurationObtaining ISP Configuration Information Macintosh Preparing Your Network Chapter Basic Configuration of the Gateway Accessing the Web Configuration ManagerLogin window opens as shown in -1below Browser-based configuration main menu Configuration using the Setup Wizard Configuring for Dynamic IP Account Setup Wizard menu for Dynamic IP addressConfiguring for Fixed IP Account Setup Wizard menu for Fixed IP addressConfiguring for an Account with Login Setup Wizard menu for PPPoE login accountsManual Configuration Completing the Configuration Basic Configuration of the Gateway Chapter Content Filtering Configuring for Content FilteringLogs Block Sites Schedule Mail Content Filtering Chapter Maintenance Gateway StatusThis screen shows the following parameters Dhcp This screen shows the following statistics PPPoE Status screen Attached Devices Ping Status screenConfiguration File Settings Management Restore and Backup the ConfigurationChanging the Configuration Password Erase the ConfigurationGateway Upgrade Gateway Upgrade menuMaintenance Advanced Configuration of the Gateway Configuring for Port Forwarding to Local ServersAdd a Custom Service Tip Multiple Computers for Half Life, Kali or Quake Edit or Delete a Port Forwarding EntryLocal Web and FTP Server Example NAT Status Security DMZ ServerDynamic DNS Respond to Ping on Internet WAN PortLAN IP Setup LAN IP Setup MenuLAN TCP/IP Setup Use router as Dhcp serverStatic Routes Static Route Summary Table Static Route Example Advanced Configuration of the Gateway PWR LED Not On Chapter TroubleshootingBasic Functioning Troubleshooting the Web Configuration Interface Test LED Never Blinks or LED Stays OnWAN LED Green or Blinking Green Troubleshooting the ISP ConnectionAdsl link WAN LED Blinking YellowObtaining a WAN IP Address WAN LED OffTroubleshooting PPPoE or PPPoA Troubleshooting Internet BrowsingTroubleshooting a TCP/IP Network Using a Ping Utility Testing the LAN Path to Your GatewayTesting the Path from Your PC to a Remote Device Ping -n 10 IP addressUsing the Default Reset button Restoring the Default Configuration and PasswordProblems with Date and Time Appendix a Technical Specifications General SpecificationsLAN Basic Router Concepts What is a Router?Appendix B Networks and Routing Basics Routing Information Protocol IP Addresses and the InternetClass E Class E addresses are for experimental use Netmask Subnet AddressingFigure B-2. Example of Subnetting a Class B Address Table B-1. Netmask Notation Translation Table for One Octet Single IP Address Operation Using NAT Private IP AddressesFigure B-3. Single IP Address Operation Using NAT MAC Addresses and Address Resolution Protocol Domain Name ServerIP Configuration by Dhcp Uplink Switches, Crossover Cables, and MDI/MDIX Switching Ethernet CablingCable Quality Glossary For example Internet Through the network Auto MDI/MDI-X1-4, 2-6, B-11, B-12 DMZ 1-3, 5-2 MDI/MDI-X1-4, 2-6, B-11, B-12 NTP 5-6 Xiii, B-7 1631 xiv, B-8