Reference Manual for the Model DG814 DSL Modem Internet Gateway
•Your ISP may require a login program.
Ask your ISP whether they require PPP over Ethernet (PPPoE) or PPP over ATM (PPPOA) login.
•If you have selected a login program, you may have incorrectly set the Service Name, User Name and Password. See “Troubleshooting PPPoE or PPPoA”, below.
•Your ISP may check for your PC's host name.
Assign the PC Host Name of your ISP account to the gateway in the
•Your ISP only allows one MAC address to connect to Internet, and may check for your PC’s MAC address. In this case, inform your ISP that you have bought a new network device, and ask them to use the gateway’s MAC address.
Troubleshooting PPPoE or PPPoA
The PPPoA or PPPoA connection can be debugged as follows:
1.Access the Main Menu of the gateways configuration at http://192.168.0.1.
2.Under the Maintenance heading, click the “Show PPPoE Status” or “Show PPPoA Status” button, depending on your connection type.
3.If all of the steps indicate “OK” then your PPPoE or PPPoA connection is up and working.
4.If any of the steps indicates “Failed”, you can attempt to reconnect by clicking “Connect”. The gateway will continue to attempt to connect indefinitely.
If you cannot connect after several minutes, you may be using an incorrect Service Name, User Name or Password. There also may be a provisioning problem with your ISP.
Note: Unless you connect manually, the gateway will not authenticate using PPPoE or PPPoA until data is transmitted to the network.
Troubleshooting Internet Browsing
If your gateway can obtain an IP address but your PC is unable to load any web pages from the Internet:
•Your PC may not recognize any DNS server addresses.
Troubleshooting |