Nlynx ZWA-G120 user manual

Page 15

5.Press “Next>>” button then set the IP address of LAN interface.

6.Press “Next>>” button then select the “AP+WDS” for “mode” and change the SSID to “ZPlus-G120-DEV2”.

7.Press “Next>>” button then select “None” for “Encryption” then press “Finished” button.

8.Wait for refreshing web page.

13

Image 15

Contents Version .0.0 Wireless LAN Device SeriesTable of Contents Preface CH 1. ZWA-G120 Installation Preface Packing List Hardware InstallationKnowing the Network Application Before Start to ConfigureWDS+AP Wisp Examples of Configuration Page Page Page Page Page Page Page Page Page Page Use the Status page to check the settings Page Page Page Page Page Page Page Disable Wireless LAN Interface BandMode Channel Number Ad HocAssociated Client RTS Threshold Advanced SettingsAuthentication Type Fragment ThresholdInt. Roaming Data RateBeacon Interval Broadcast SsidBlock Wlan Relay Isolate Client Transmit PowerWEP Encryption Setting Configuring Wireless SecurityWEP Encryption with 802.1x Setting Pre-Share Key WPA Encryption SettingWPA Authentication Mode Enterprise RadiusQuick start to configure Configuring as Wlan Client AdapterPage Data Encryption Authentication TypeBus topology WDS network topologyRing topology Star topologyWireless Repeater WDS ApplicationMesh topology： Wireless station Wireless BridgeConfiguring LAN to WAN Firewall Port FilteringIP Filtering MAC Filtering Configuring Port Forwarding Virtual ServerMultiple Servers behind NAT Example Configuring DMZConfiguring WAN Interface IP Address Static IPPPPoE Dhcp Client Dynamic IPPptp MTU Size Configuring Clone MAC AddressPage Configuring Dhcp Server System Management Using CLI MenuAbout Snmp Agent Firmware UpgradeConfiguration Data Backup & Restore