Nlynx ZWA-G120 user manual About Snmp Agent, Firmware Upgrade

Page 54

To disable the Web-Browser password protection just leave the “User Name” field to blank then click “Apply Changes” button.

To change the password of user “root” for SSH session, please use the CLI menu item G. System SettingÆA. Root Password

About SNMP Agent

This device is compatible with SNMP v1/v2c and provide standard MIB II. Currently only the “public” community string is available and the modified settings by SNMP SET request will be lost after rebooting the device.

Firmware Upgrade

Firmware Types

The firmware for this device is divided into 2 parts, one is web pages firmware the other is application firmware, and the naming usually are g120webpage.bin and g120linux.bin. To upgrade firmware, we suggest user first upgrade the application firmware then web pages firmware.

Upgrading Firmware

The Web-Browser upgrading interface is the simplest and safest way for user, it will check the firmware checksum and signature, and the wrong firmware won’t be accepted. After upgrading, the device will reboot and please note that depends on the version of firmware, the upgrading may cause the device configuration to be restored to the factory default setting, and the original configuration data will be lost!

52

Page 53 Page 55
Image 54
Page 53 Page 55
Contents Wireless LAN Device Series Version .0.0Table of Contents Preface CH 1. ZWA-G120 Installation Preface Hardware Installation Packing ListBefore Start to Configure Knowing the Network ApplicationWDS+AP Wisp Examples of Configuration Page Page Page Page Page Page Page Page Page Page Use the Status page to check the settings Page Page Page Page Page Page Page Disable Wireless LAN Interface BandMode Ad Hoc Channel NumberAssociated Client Fragment Threshold Advanced SettingsAuthentication Type RTS ThresholdBroadcast Ssid Data RateBeacon Interval Int. RoamingTransmit Power Block Wlan Relay Isolate ClientConfiguring Wireless Security WEP Encryption SettingWEP Encryption with 802.1x Setting Enterprise Radius WPA Encryption SettingWPA Authentication Mode Pre-Share KeyConfiguring as Wlan Client Adapter Quick start to configurePage Authentication Type Data EncryptionWDS network topology Bus topologyStar topology Ring topologyWireless Repeater WDS ApplicationMesh topology： Wireless Bridge Wireless stationConfiguring LAN to WAN Firewall Port FilteringIP Filtering Configuring Port Forwarding Virtual Server MAC FilteringConfiguring DMZ Multiple Servers behind NAT ExampleConfiguring WAN Interface Static IP IP AddressDhcp Client Dynamic IP PPPoEPptp Configuring Clone MAC Address MTU SizePage Configuring Dhcp Server Using CLI Menu System ManagementFirmware Upgrade About Snmp AgentConfiguration Data Backup & Restore
Top Page Image Contents