Nlynx ZWA-G120 user manual Static IP, IP Address

Page 47

Static IP

You can get the IP configuration data of Static-IP from your ISP. And you will need to fill the fields of IP address, subnet mask, gateway address, and one of the DNS addresses.

IP Address:

The Internet Protocol (IP) address of WAN interface provided by your

 

ISP or MIS. The address will be your network identifier besides your

 

local network.

Subnet Mask:

The number used to identify the IP subnet network, indicating whether

 

the IP address can be recognized on the LAN or if it must be reached

 

through a gateway.

Default Gateway:

The IP address of Default Gateway provided by your ISP or MIS.

 

Default Gateway is the intermediate network device that has knowledge

 

of the network IDs of the other networks in the Wide Area Network, so it

 

can forward the packets to other gateways until they are delivered to the

 

one connected to the specified destination.

DNS 1~3:

The IP addresses of DNS provided by your ISP.

 

DNS (Domain Name Server) is used to map domain names to IP

 

addresses. DNS maintain central lists of domain name/IP addresses and

 

map the domain names in your Internet requests to other servers on the

 

Internet until the specified web site is found.

Clone MAC

Clone device MAC address to the specify MAC address required by your

Address:

ISP

Enable uPnP:

Enable uPnP, this function allows the device to be found and configured

 

automatically by the system. (Ex. Window XP)

45

Image 47
Contents Version .0.0 Wireless LAN Device SeriesTable of Contents Preface CH 1. ZWA-G120 Installation Preface Packing List Hardware InstallationKnowing the Network Application Before Start to ConfigureWDS+AP Wisp Examples of Configuration Page Page Page Page Page Page Page Page Page Page Use the Status page to check the settings Page Page Page Page Page Page Page Mode Disable Wireless LAN InterfaceBand Channel Number Ad HocAssociated Client RTS Threshold Advanced SettingsAuthentication Type Fragment ThresholdInt. Roaming Data RateBeacon Interval Broadcast SsidBlock Wlan Relay Isolate Client Transmit PowerWEP Encryption Setting Configuring Wireless SecurityWEP Encryption with 802.1x Setting Pre-Share Key WPA Encryption SettingWPA Authentication Mode Enterprise RadiusQuick start to configure Configuring as Wlan Client AdapterPage Data Encryption Authentication TypeBus topology WDS network topologyRing topology Star topologyMesh topology: Wireless RepeaterWDS Application Wireless station Wireless BridgeIP Filtering Configuring LAN to WAN FirewallPort Filtering MAC Filtering Configuring Port Forwarding Virtual ServerMultiple Servers behind NAT Example Configuring DMZConfiguring WAN Interface IP Address Static IPPPPoE Dhcp Client Dynamic IPPptp MTU Size Configuring Clone MAC AddressPage Configuring Dhcp Server System Management Using CLI MenuAbout Snmp Agent Firmware UpgradeConfiguration Data Backup & Restore