Milan Technology MIL-SM801P, MIL-SM801G, MIL-SM800P manual Port / Trunk Configuration

Page 24

4-3-2. Port / Trunk Configuration

The menu provides per port configuration for speed and duplex as well as port trunking. Use the Space key to select the option preferred for each item.

1.Enabled: User can disable or enable the port.

2.Auto Negotiate: User can set auto-negotiation to be enabled or disabled. The default is that auto-negotiation is enabled.

3.Speed/Duplex Config: User can set the port speed to be 100Mbps or 10Mbps on ports 1 through 8. The port 9 fiber port is fixed at 100Mbps for the MIL-SM801P model series. The port 9 fiber port for the MIL- SM801G models is fixed at 1000Mbps. All ports can be set for full-duplex or half-duplex mode.

4.Flow Control: User can set the flow control function to be on or off. The default is that flow control is enabled.

5.Group: User can set trunk groups for port 1 through port 8. There are four possible trunk groups.

Actions->

<Quit>: Exits the page of port configuration and return to the previous menu.

<Edit>: Configures all items. When finished, pressing ESC returns to the action menu line.

<Save>: Saves all configured values.

<Previous Page>: Returns to previous page.

<Next page>: Goes to next page to configure.

20

Image 24

Contents Managed 8 & 9 Port Switches Regulatory Approval Table of Contents Technical Specifications Troubleshooting Introduction Features Package Contents Hardware Description LED Indicators Power 100MRear Panel Attaching Rubber Feet Network Application Segment Application Network Configuration Connecting a Terminal or PC to the Console PortSettings of communication parameters Console MenuProtocol Related Configuration Configures protocol features Main MenuStatus and Counters Port Status ActionsPort Counters System InformationSwitch Static Configuration Administration ConfigurationDevice Information IP Configuration Change Password Change UsernamePort / Trunk Configuration Port Mirroring Configuration Vlan Configuration Choose a Vlan Port Based VLANsPort Based VLANs IEEE802.1Q VLANs Page Create a Vlan Group Edit / Delete a Vlan Group Priority Configuration MAC Address Configuration Static MAC Address Add static MAC addressEdit static MAC address Delete static MAC addressMisc. Configuration Port Security MAC Age Interval Broadcast Storm Filtering Max Bridge Transmit Delay Bound Protocol Related Configuration 1.STP STP Enable System Configuration STP Port Configuration Snmp System Options Community Strings Trap Managers Gvrp LacpAggregator Setting State Activity Lacp Status Switch Reboot Xmodem Upgrade Web Management RootWeb Management Home Overview Port status Port Statistics Single port counter as followsAdministrator Switch Settings BasicIP Address Miscellaneous Settings AdvancedPriority Queue Service settings Protocol Enable Setting Vlan Operation Mode No VlanIgmp Theory of Operation Gvrp Garp Vlan Registration Protocol Console Port Information Port Controls TrunkingAggregator Setting Aggregator Information Filter Database Igmp Snooping Message Description QueryClick on Filter Database Port Security Support Port-based VLANs Ieee 802.1Q Vlan Support Protocol-based VlanVlan Configuration Page Configure port VID settings Settings Port VID PvidPort VID Ingress FilteringSet Spanning Tree PriorityPort Priority Port Mirroring Snmp Security Manager Trap ManagerTftp Update Firmware Configuration Backup Tftp Restore ConfigurationWeb management select Administrator-TFTP update firmware Tftp Backup Configuration Reset SystemReboot Specifications Weight Humidity External PowerPower SafetyTroubleshooting „ Cabling Page Page Page 90000405 Rev. a