Milan Technology MIL-SM800P, MIL-SM801P, MIL-SM801G manual Gvrp Garp Vlan Registration Protocol

Page 62

3.The following topology must be set when the IP address of the switch is not the smallest in the subnet. The network will cause a multi-cast storm from the IGMP client report if it is in Auto mode. All switches must be in disable mode when the VOD server is configured for IGMP Queryer.

Note: It is suggested that the VOD server switch have the smallest IP address.

All of the switches must be in disable mode when the VOD server is configured for IGMP Queryer.

GVRP (GARP VLAN Registration Protocol)

GVRP allows automatic VLAN configuration between the switch and nodes. A GVRP request can be sent using the VID of a VLAN defined on the switch when the switch is connected to a device with GVRP enabled. The switch will automatically add that device to the existing VLAN.

58

Image 62

Contents Managed 8 & 9 Port Switches Regulatory Approval Table of Contents Technical Specifications Troubleshooting Introduction Features Package Contents Hardware Description LED Indicators Power 100MRear Panel Attaching Rubber Feet Network Application Segment Application Network Configuration Connecting a Terminal or PC to the Console PortSettings of communication parameters Console MenuProtocol Related Configuration Configures protocol features Main MenuStatus and Counters Port Status ActionsPort Counters System InformationSwitch Static Configuration Administration ConfigurationDevice Information IP Configuration Change Password Change UsernamePort / Trunk Configuration Port Mirroring Configuration Vlan Configuration Choose a Vlan Port Based VLANsPort Based VLANs IEEE802.1Q VLANs Page Create a Vlan Group Edit / Delete a Vlan Group Priority Configuration MAC Address Configuration Static MAC Address Add static MAC addressEdit static MAC address Delete static MAC addressMisc. Configuration Port Security MAC Age Interval Broadcast Storm Filtering Max Bridge Transmit Delay Bound Protocol Related Configuration 1.STP STP Enable System Configuration STP Port Configuration Snmp System Options Community Strings Trap Managers Gvrp LacpAggregator Setting State Activity Lacp Status Switch Reboot Xmodem Upgrade Web Management RootWeb Management Home Overview Port status Port Statistics Single port counter as followsIP Address AdministratorSwitch Settings Basic Miscellaneous Settings AdvancedPriority Queue Service settings Protocol Enable Setting Vlan Operation Mode No VlanIgmp Theory of Operation Gvrp Garp Vlan Registration Protocol Console Port Information Port Controls TrunkingAggregator Setting Aggregator Information Filter Database Igmp Snooping Message Description QueryClick on Filter Database Port Security Support Port-based VLANs Ieee 802.1Q Vlan Support Protocol-based VlanVlan Configuration Page Port VID Configure port VID settingsSettings Port VID Pvid Ingress FilteringSet Spanning Tree PriorityPort Priority Port Mirroring Snmp Security Manager Trap ManagerWeb management select Administrator-TFTP update firmware Tftp Update FirmwareConfiguration Backup Tftp Restore Configuration Reboot Tftp Backup ConfigurationReset System Specifications Power WeightHumidity External Power SafetyTroubleshooting „ Cabling Page Page Page 90000405 Rev. a