Milan Technology MIL-SM801G MAC Address Configuration Static MAC Address, Add static MAC address

Page 34

4-3-6.MAC Address Configuration

4-3-6-1.Static MAC Address

When you add a static MAC address, it remains in the switch's address table regardless of whether or not the device is physically connected to the switch. This saves the switch from having to re-learn a device's MAC address when the device is disconnected or powered off and then becomes active again.

The menu shows the current configured static MAC addresses. The user can add, modify or delete a static MAC address. Once added, the MAC address will be listed on this page.

Add static MAC address

1.Press the <Add> key. Then press the <Edit> key on this menu to add a static MAC address.

2.Enter the MAC address to and from which the port should permanently forward traffic.

11.In the Port Num field, enter the port number for the device.

12.The VLAN ID field is not available if the switch is configured for port based VLANs. If tag-based (802.1Q) VLANs are configured, the static addresses are associated with individual VLANs. The user must add the VID to be associated with the MAC address.

4.Press ESC to go back to the action menu line, and then select <Save> to save all configured values.

Note: If you change VLAN types from IEEE to port based, all your static MAC addresses will be deleted.

30

Image 34

Contents Managed 8 & 9 Port Switches Regulatory Approval Table of Contents Technical Specifications Troubleshooting Introduction Features Package Contents Hardware Description LED Indicators Power 100MRear Panel Attaching Rubber Feet Network Application Segment Application Network Configuration Connecting a Terminal or PC to the Console PortSettings of communication parameters Console MenuProtocol Related Configuration Configures protocol features Main MenuStatus and Counters Port Status ActionsPort Counters System InformationSwitch Static Configuration Administration ConfigurationDevice Information IP Configuration Change Password Change UsernamePort / Trunk Configuration Port Mirroring Configuration Vlan Configuration Choose a Vlan Port Based VLANsPort Based VLANs IEEE802.1Q VLANs Page Create a Vlan Group Edit / Delete a Vlan Group Priority Configuration MAC Address Configuration Static MAC Address Add static MAC addressEdit static MAC address Delete static MAC addressMisc. Configuration Port Security MAC Age Interval Broadcast Storm Filtering Max Bridge Transmit Delay Bound Protocol Related Configuration 1.STP STP Enable System Configuration STP Port Configuration Snmp System Options Community Strings Trap Managers Gvrp LacpAggregator Setting State Activity Lacp Status Switch Reboot Xmodem Upgrade Web Management RootWeb Management Home Overview Port status Port Statistics Single port counter as followsSwitch Settings Basic AdministratorIP Address Miscellaneous Settings AdvancedPriority Queue Service settings Protocol Enable Setting Vlan Operation Mode No VlanIgmp Theory of Operation Gvrp Garp Vlan Registration Protocol Console Port Information Port Controls TrunkingAggregator Setting Aggregator Information Filter Database Igmp Snooping Message Description QueryClick on Filter Database Port Security Support Port-based VLANs Ieee 802.1Q Vlan Support Protocol-based VlanVlan Configuration Page Port VID Configure port VID settingsSettings Port VID Pvid Ingress FilteringSet Spanning Tree PriorityPort Priority Port Mirroring Snmp Security Manager Trap ManagerConfiguration Backup Tftp Restore Configuration Tftp Update FirmwareWeb management select Administrator-TFTP update firmware Reset System Tftp Backup ConfigurationReboot Specifications Power WeightHumidity External Power SafetyTroubleshooting „ Cabling Page Page Page 90000405 Rev. a