Milan Technology MIL-SM801P, MIL-SM801G, MIL-SM800P manual Max Bridge Transmit Delay Bound

Page 39

4-3-7-4.Max Bridge Transmit Delay Bound

Max bridge transmit delay bound: Limits the packets queuing time in the switch. If enabled, the packets exceeding the queuing time will be dropped. Press the Space key to set the time. The valid values are 1sec, 2sec, 4sec and Off. Default is OFF. This setting does not depend on what values are set in the “Priority Configuration” menu.

Enable Delay Bound: If this parameter is enabled, the “Max bridge transmit delay bound” must also be configured. This item allows you to limit the queuing time of low priority packets in the switch. When the low priority packets exceed the “Max Delay Time” they will be transmitted. Press the Space key to enable or disable this function. By default the Enable Delay Bound is set OFF.

Max Delay Time: Sets the time that low priority packets are queued in the switch. The valid range is 1~255 ms. Since the default is OFF, the Max Delay Time is 0. This item must be set if “Enable Delay Bound” is configured.

NOTE: “Max bridge transit delay bound control” must be enabled before Max Delay Bound is enabled.

Actions->

<Edit>: Configures all items. When finished, pressing ESC returns to the action menu line.

<Save>: Saves all configured values.

<Quit>: Exits this page and returns to the previous menu.

35

Image 39

Contents Managed 8 & 9 Port Switches Regulatory Approval Table of Contents Technical Specifications Troubleshooting Introduction Features Package Contents Hardware Description Power 100M LED IndicatorsRear Panel Attaching Rubber Feet Network Application Segment Application Connecting a Terminal or PC to the Console Port Network ConfigurationConsole Menu Settings of communication parametersMain Menu Protocol Related Configuration Configures protocol featuresStatus and Counters Actions Port StatusSystem Information Port CountersAdministration Configuration Switch Static ConfigurationDevice Information IP Configuration Change Username Change PasswordPort / Trunk Configuration Port Mirroring Configuration Vlan Configuration Port Based VLANs Choose a VlanPort Based VLANs IEEE802.1Q VLANs Page Create a Vlan Group Edit / Delete a Vlan Group Priority Configuration Add static MAC address MAC Address Configuration Static MAC AddressDelete static MAC address Edit static MAC addressMisc. Configuration Port Security MAC Age Interval Broadcast Storm Filtering Max Bridge Transmit Delay Bound Protocol Related Configuration 1.STP STP Enable System Configuration STP Port Configuration Snmp System Options Community Strings Trap Managers Lacp GvrpAggregator Setting State Activity Lacp Status Switch Reboot Xmodem Upgrade Root Web ManagementWeb Management Home Overview Port status Single port counter as follows Port StatisticsAdministrator Switch Settings BasicIP Address Advanced Miscellaneous SettingsPriority Queue Service settings Vlan Operation Mode No Vlan Protocol Enable SettingIgmp Theory of Operation Gvrp Garp Vlan Registration Protocol Console Port Information Trunking Port ControlsAggregator Setting Aggregator Information Message Description Query Filter Database Igmp SnoopingClick on Filter Database Port Security Support Protocol-based Vlan Support Port-based VLANs Ieee 802.1Q VlanVlan Configuration Page Ingress Filtering Configure port VID settingsSettings Port VID Pvid Port VIDPriority Set Spanning TreePort Priority Port Mirroring Snmp Trap Manager Security ManagerTftp Update Firmware Configuration Backup Tftp Restore ConfigurationWeb management select Administrator-TFTP update firmware Tftp Backup Configuration Reset SystemReboot Specifications Safety WeightHumidity External Power PowerTroubleshooting „ Cabling Page Page Page 90000405 Rev. a