Milan Technology MIL-SM801P, MIL-SM801G, MIL-SM800P manual Port Priority

Page 75

Information about the current spanning tree status is displayed in this table.

The priority and path cost can be configured for each port. Click the Apply button to modify the configuration.

Description

Port Priority

A change to the Port Priority affects which port will be the root port. The lowest number has the highest priority. The range is 0-255 and the default setting for all ports is 128. If you change the value, you must reboot the switch.

Path Cost

Path Cost specifies the path cost of the port that the switch uses to determine which ports are the forwarding ports. The lowest number becomes the forwarding port. The range is 1-65535 and the default value is based on IEEE802.1D

10Mb/s = 50-600 100Mb/s = 10-60

If you change the value, you must reboot the switch.

71

Image 75
Contents Managed 8 & 9 Port Switches Regulatory Approval Table of Contents Technical Specifications Troubleshooting Introduction Features Package Contents Hardware Description Power 100M LED IndicatorsRear Panel Attaching Rubber Feet Network Application Segment Application Connecting a Terminal or PC to the Console Port Network ConfigurationConsole Menu Settings of communication parametersMain Menu Protocol Related Configuration Configures protocol featuresStatus and Counters Actions Port StatusSystem Information Port CountersAdministration Configuration Switch Static ConfigurationDevice Information IP Configuration Change Username Change PasswordPort / Trunk Configuration Port Mirroring Configuration Vlan Configuration Port Based VLANs Choose a VlanPort Based VLANs IEEE802.1Q VLANs Page Create a Vlan Group Edit / Delete a Vlan Group Priority Configuration Add static MAC address MAC Address Configuration Static MAC AddressDelete static MAC address Edit static MAC addressMisc. Configuration Port Security MAC Age Interval Broadcast Storm Filtering Max Bridge Transmit Delay Bound Protocol Related Configuration 1.STP STP Enable System Configuration STP Port Configuration Snmp System Options Community Strings Trap Managers Lacp GvrpAggregator Setting State Activity Lacp Status Switch Reboot Xmodem Upgrade Root Web ManagementWeb Management Home Overview Port status Single port counter as follows Port StatisticsAdministrator Switch Settings BasicIP Address Advanced Miscellaneous SettingsPriority Queue Service settings Vlan Operation Mode No Vlan Protocol Enable SettingIgmp Theory of Operation Gvrp Garp Vlan Registration Protocol Console Port Information Trunking Port ControlsAggregator Setting Aggregator Information Message Description Query Filter Database Igmp SnoopingClick on Filter Database Port Security Support Protocol-based Vlan Support Port-based VLANs Ieee 802.1Q VlanVlan Configuration Page Ingress Filtering Configure port VID settingsSettings Port VID Pvid Port VIDPriority Set Spanning TreePort Priority Port Mirroring Snmp Trap Manager Security ManagerTftp Update Firmware Configuration Backup Tftp Restore ConfigurationWeb management select Administrator-TFTP update firmware Tftp Backup Configuration Reset SystemReboot Specifications Safety WeightHumidity External Power PowerTroubleshooting „ Cabling Page Page Page 90000405 Rev. a