Milan Technology MIL-SM801P, MIL-SM801G, MIL-SM800P manual LED Indicators, Power 100M

Page 9

LED Indicators

Figure 2-4. LED Indicators

There are three LED-Indicators (100M, LNK/ACT, FDX/COL) for each RJ-45 port. The following table provides descriptions of the LED statuses and meaning. They provide a real-time indication of systems operation status.

LED

Power

100M

LNK /

ACT

Status

On

On

Off

On

Blinks

Color

Green

Green

Green

Green

Description

Power On

The port is operating at the speed of 100Mbps.

The port is operating at the speed of 10Mbps.

The port is successfully connecting with a device.

The port is receiving or transmitting data.

FDX /

COL

Off		No device attached.

On	Orange	The port is operating in full-duplex
On	Orange	mode.
Blinks	Orange	Collision of Packets is occurring on the
Blinks	Orange	port.
Off		Half-duplex mode or no device
Off		attached.
		attached.

Table 2-1. The description of LED Indicators

5

Image 9

Contents Managed 8 & 9 Port Switches Regulatory Approval Table of Contents Technical Specifications Troubleshooting Introduction Features Package Contents Hardware Description Power 100M LED IndicatorsRear Panel Attaching Rubber Feet Network Application Segment Application Connecting a Terminal or PC to the Console Port Network ConfigurationConsole Menu Settings of communication parametersMain Menu Protocol Related Configuration Configures protocol featuresStatus and Counters Actions Port StatusSystem Information Port CountersAdministration Configuration Switch Static ConfigurationDevice Information IP Configuration Change Username Change PasswordPort / Trunk Configuration Port Mirroring Configuration Vlan Configuration Port Based VLANs Choose a VlanPort Based VLANs IEEE802.1Q VLANs Page Create a Vlan Group Edit / Delete a Vlan Group Priority Configuration Add static MAC address MAC Address Configuration Static MAC AddressDelete static MAC address Edit static MAC addressMisc. Configuration Port Security MAC Age Interval Broadcast Storm Filtering Max Bridge Transmit Delay Bound Protocol Related Configuration 1.STP STP Enable System Configuration STP Port Configuration Snmp System Options Community Strings Trap Managers Lacp GvrpAggregator Setting State Activity Lacp Status Switch Reboot Xmodem Upgrade Root Web ManagementWeb Management Home Overview Port status Single port counter as follows Port StatisticsAdministrator Switch Settings BasicIP Address Advanced Miscellaneous SettingsPriority Queue Service settings Vlan Operation Mode No Vlan Protocol Enable SettingIgmp Theory of Operation Gvrp Garp Vlan Registration Protocol Console Port Information Trunking Port ControlsAggregator Setting Aggregator Information Message Description Query Filter Database Igmp SnoopingClick on Filter Database Port Security Support Protocol-based Vlan Support Port-based VLANs Ieee 802.1Q VlanVlan Configuration Page Settings Port VID Pvid Configure port VID settingsPort VID Ingress FilteringPriority Set Spanning TreePort Priority Port Mirroring Snmp Trap Manager Security ManagerTftp Update Firmware Configuration Backup Tftp Restore ConfigurationWeb management select Administrator-TFTP update firmware Tftp Backup Configuration Reset SystemReboot Specifications Humidity External Power WeightPower SafetyTroubleshooting „ Cabling Page Page Page 90000405 Rev. a