Milan Technology MIL-SM801G, MIL-SM801P, MIL-SM800P manual Package Contents

Page 7

Package Contents

Unpack the contents of the package and verify them against the checklist below.

„MIL-SM801P, MIL-SM801G or MIL-SM800P switch

„Power Cord

„Four Rubber Feet

„RS-232 console cable

„User Guide

„Warranty Card

If any item is missing or damaged, please contact your local dealer for service.

Management Methods

The MIL-SM801P, MIL-SM801G and MIL-SM800P switch series support the following management methods:

„Console and Telnet Management

„Web-based Management

„SNMP Network Management

Console and Telnet Management

Console Management is done through the RS-232 Console Port. Managing the switch in this method requires a direct connection between PC and the switch. Telnet management requires a network connection. The default IP address is 192.168.1.77 with a subnet mask of 255.255.255.0. This default address can be used to login and change the configuration using Telnet.

Web-based Management

The switch provides an embedded HTML web server residing in flash memory. It offers advanced management features and allows users to manage the switch from anywhere on the network through a standard browser such as Microsoft Internet Explorer or Netscape.

SNMP Network Management

SNMP (Simple Network Management Protocol) provides a means to monitor and control network device, and to manage configurations, statistic collection, performance, and security.

3

Page 6 Page 8
Image 7
Page 6 Page 8
Contents Managed 8 & 9 Port Switches Regulatory Approval Table of Contents Technical Specifications Troubleshooting Introduction Features Package Contents Hardware Description Power 100M LED IndicatorsRear Panel Attaching Rubber Feet Network Application Segment Application Connecting a Terminal or PC to the Console Port Network ConfigurationConsole Menu Settings of communication parametersMain Menu Protocol Related Configuration Configures protocol featuresStatus and Counters Actions Port StatusSystem Information Port CountersAdministration Configuration Switch Static ConfigurationDevice Information IP Configuration Change Username Change PasswordPort / Trunk Configuration Port Mirroring Configuration Vlan Configuration Port Based VLANs Choose a VlanPort Based VLANs IEEE802.1Q VLANs Page Create a Vlan Group Edit / Delete a Vlan Group Priority Configuration Add static MAC address MAC Address Configuration Static MAC AddressDelete static MAC address Edit static MAC addressMisc. Configuration Port Security MAC Age Interval Broadcast Storm Filtering Max Bridge Transmit Delay Bound Protocol Related Configuration 1.STP STP Enable System Configuration STP Port Configuration Snmp System Options Community Strings Trap Managers Lacp GvrpAggregator Setting State Activity Lacp Status Switch Reboot Xmodem Upgrade Root Web ManagementWeb Management Home Overview Port status Single port counter as follows Port StatisticsSwitch Settings Basic AdministratorIP Address Advanced Miscellaneous SettingsPriority Queue Service settings Vlan Operation Mode No Vlan Protocol Enable SettingIgmp Theory of Operation Gvrp Garp Vlan Registration Protocol Console Port Information Trunking Port ControlsAggregator Setting Aggregator Information Message Description Query Filter Database Igmp SnoopingClick on Filter Database Port Security Support Protocol-based Vlan Support Port-based VLANs Ieee 802.1Q VlanVlan Configuration Page Ingress Filtering Configure port VID settingsSettings Port VID Pvid Port VIDPriority Set Spanning TreePort Priority Port Mirroring Snmp Trap Manager Security ManagerConfiguration Backup Tftp Restore Configuration Tftp Update FirmwareWeb management select Administrator-TFTP update firmware Reset System Tftp Backup ConfigurationReboot Specifications Safety WeightHumidity External Power PowerTroubleshooting „ Cabling Page Page Page 90000405 Rev. a
Top Page Image Contents