Milan Technology MIL-SM801P, MIL-SM801G, MIL-SM800P manual Features

Features

„Conforms to IEEE 802.3, 802.3u, and 802.3x Ethernet Standards

„Eight auto-sensing 10/100Mbps Ethernet RJ-45 ports

„Automatic MDI/MDIX crossover for each 10BASE-T/ 100BASE-TX port

„One Fixed 100Mbps Fiber port SC/SC single-mode, MT-RJ, VF-45 connector for MIL-SM801P series only

„One Fixed 1000Mbps Gigabit Ethernet port for MIL-SM801G series only

„One Console port on the rear for switch software configuration

„Half-duplex mode for back pressure and flow control for full- duplex

„Store-and-forward switching architecture

„Automatic address learning

„Static MAC table for a secured network

„8K-entry MAC address table

„2Mbit memory buffer sharing

„Non-blocking full wire speed performance

„LED-indicators for Power, 100M, LK/ACT, FD/COL

„10-inch design for desktop or rackmount

Intelligent Management Features

„Web-based management

„SNMP network management

„Console and Telnet management

„IEEE 802.1Q VLAN Tag, up to 4094 VLAN groups

„IEEE 802.1ad Port Trunking and IEEE 802.3 ad LACP supported

„IEEE 802.1d Spanning Tree

„MIB II ( RFC1213 ) supported

„IP Multi-cast, IGMP Snooping

„Quality of Service (QoS)

„Port Mirroring

„Broadcast Filtering

„Static MAC Address support

„Port Security

„GVRP

2