Milan Technology MIL-SM808G manual LED Indicators, Power

Page 10

LED Indicators

Figure 2-2. LED Indicators

There are two LED-Indicators (LNK/ACT, FDX/COL) for each Fiber port, one LED-Indicator (LNK/ACT) for the GBIC port and one LED-Indicator for power. The following table provides descriptions of the LED statuses and meaning. They provide a real-time indication of systematic operation status.

LED

Power

LNK /

ACT

Status

On

On

Blinks

Color

Green

Green

Green

Description

Power On

The port is successfully connecting with a device.

The port is receiving or transmitting data.

FDX /

COL

Off

 

No device attached.

 

 

 

On

Orange

The port is operating in full-duplex

mode and device is attached.

Blinks

Orange

Collision of Packets is occurring on the

port.

Off

 

Half-duplex mode or no device

 

attached.

 

 

Table 2-1. The description of LED Indicators

6

Image 10
Contents MIL-SM808G Regulatory Approval Table of Contents Technical Specifications Introduction Features Intelligent Management FeaturesConsole and Telnet Management Package ContentsManagement Methods Web-based ManagementSnmp Network Management Hardware Description Front PanelLED Indicators PowerDesktop Installation Rear PanelPower On Network Application Segment ApplicationNetwork Configuration Connecting a Terminal or PC to the Console PortSettings of communication parameters Console MenuProtocol Related Configuration Configures protocol features Main MenuStatus and Counters Port Status ActionsPort Counters System Information Switch Static Configuration Administration ConfigurationDevice Information IP Configuration Change Password Change UsernamePort / Trunk Configuration Port Mirroring Configuration Vlan Configuration Port Based VLANs Vlan ConfigureChoose a Vlan IEEE802.1Q VLANsPage Create a Vlan Group Edit / Delete a Vlan Group Choose Edit or Delete itemPriority Configuration MAC Address Configuration Static MAC Address Edit static MAC address Add static MAC addressDelete static MAC address Edit Filtering MAC address Filtering MAC AddressDelete Filtering MAC address Misc Configuration Port Security MAC Age Interval Broadcast Storm Filtering Max Bridge Transmit Delay Bound Protocol Related Configuration 1.STP STP Enable System Configuration STP Port Configuration Snmp System Options Community Strings Trap Managers Gvrp Lacp Aggregator Setting State Activity Lacp Status Reboot Switch Updating Firmware using the Console Port Page Web Management Function RootWeb Management Home Overview Port status Port Statistics AdministratorSingle port counter screen Switch Settings Basic IP AddressMiscellaneous Settings AdvancedPriority Queue Service settings Protocol Enable Setting Vlan Operation ModeIgmp Theory of Operation Gvrp Garp Vlan Registration Protocol Console Port Information Port Controls TrunkingAggregator Setting Aggregator Information Filter Database Igmp Snooping Message Description QueryClick on Filter Database Port Security MAC Filtering Support Port-based VLANs Ieee 802.1Q Vlan Support Protocol-based VlanVlan Configuration Page Port VID Pvid Configure port VID settingsIngress Filtering Spanning Tree Priority Parameter Description Port Port Mirroring Snmp Security Manager Trap ManagerConfiguration Backup Tftp Restore Configuration Tftp Update FirmwareWeb management select Administrator-TFTP update firmware Reset System Tftp Backup ConfigurationReboot Weight Max Filtering Rate LED IndicatorsDimensions Humidity External PowerTroubleshooting „ Cabling