Milan Technology MIL-SM808G manual Console Menu, Settings of communication parameters

Page 15

After the connection between Switch and PC is finished, turn on the PC and run a terminal emulation program or Hyper Terminal to match the following default characteristics of the console port:

Baud Rate: 9600 bps

Data Bits: 8

Parity: none

Stop Bits: 1

Flow Control: None

Figure 4-2. The settings of communication parameters

After you have entered the parameter settings, press the “ Enter “ Key and the Main Menu of console management appears.

Console – Menu

1.The switch also provides a serial interface to manage and monitor the switch. The user can follow the Console Port Information provided by the web to use the Windows HyperTerminal program to link the switch.

2.Type the user name and password to login. The default user name is “root”; the default password is “root”.

3.The timeout on the console port is 60 seconds. If no action is taken on the console screen for one minute, the program reverts back to the logon screen and a new login is necessary in order to continue.

4.The switch is shipped with a default IP address of 192.168.1.77. The default subnet mask is 255.255.255.0.

11

Image 15

Contents MIL-SM808G Regulatory Approval Table of Contents Technical Specifications Introduction Intelligent Management Features FeaturesWeb-based Management Package ContentsManagement Methods Console and Telnet ManagementSnmp Network Management Front Panel Hardware DescriptionPower LED IndicatorsRear Panel Desktop InstallationPower On Segment Application Network ApplicationConnecting a Terminal or PC to the Console Port Network ConfigurationConsole Menu Settings of communication parametersMain Menu Protocol Related Configuration Configures protocol featuresStatus and Counters Actions Port StatusPort Counters System Information Administration Configuration Switch Static ConfigurationDevice Information IP Configuration Change Username Change PasswordPort / Trunk Configuration Port Mirroring Configuration Vlan Configuration IEEE802.1Q VLANs Vlan ConfigureChoose a Vlan Port Based VLANsPage Create a Vlan Group Choose Edit or Delete item Edit / Delete a Vlan GroupPriority Configuration MAC Address Configuration Static MAC Address Add static MAC address Edit static MAC addressDelete static MAC address Filtering MAC Address Edit Filtering MAC addressDelete Filtering MAC address Misc Configuration Port Security MAC Age Interval Broadcast Storm Filtering Max Bridge Transmit Delay Bound Protocol Related Configuration 1.STP STP Enable System Configuration STP Port Configuration Snmp System Options Community Strings Trap Managers Gvrp Lacp Aggregator Setting State Activity Lacp Status Reboot Switch Updating Firmware using the Console Port Page Root Web Management FunctionWeb Management Home Overview Port status Administrator Port StatisticsSingle port counter screen IP Address Switch Settings BasicAdvanced Miscellaneous SettingsPriority Queue Service settings Vlan Operation Mode Protocol Enable SettingIgmp Theory of Operation Gvrp Garp Vlan Registration Protocol Console Port Information Trunking Port ControlsAggregator Setting Aggregator Information Message Description Query Filter Database Igmp SnoopingClick on Filter Database Port Security MAC Filtering Support Protocol-based Vlan Support Port-based VLANs Ieee 802.1Q VlanVlan Configuration Page Configure port VID settings Port VID PvidIngress Filtering Spanning Tree Priority Parameter Description Port Port Mirroring Snmp Trap Manager Security ManagerTftp Update Firmware Configuration Backup Tftp Restore ConfigurationWeb management select Administrator-TFTP update firmware Tftp Backup Configuration Reset SystemReboot Humidity External Power Max Filtering Rate LED IndicatorsDimensions WeightTroubleshooting „ Cabling