Milan Technology MIL-SM808G manual IP Address, Switch Settings Basic

Page 60

5-4-1. IP Address

The IP Settings can be changed by entering new values and clicking the apply button. The switch must be reset for the new IP address to take effect.

Default IP:192.168.1.77

Subnetmask:255.255.255.0

Gateway:192.168.1.6

5-4-2. Switch Settings

5-4-2-1.Basic

Description: Displays the name of device type.

MAC Address: Displays unique hardware address assigned by manufacturer.

Firmware Version: Displays the switch’s downloaded firmware version.

Hardware Version: Displays the switch’s hardware version.

Kernel version: Displays write to default EEPROM value version.

56

Image 60

Contents MIL-SM808G Regulatory Approval Table of Contents Technical Specifications Introduction Features Intelligent Management FeaturesPackage Contents Management MethodsConsole and Telnet Management Web-based ManagementSnmp Network Management Hardware Description Front PanelLED Indicators PowerDesktop Installation Rear PanelPower On Network Application Segment ApplicationNetwork Configuration Connecting a Terminal or PC to the Console PortSettings of communication parameters Console MenuProtocol Related Configuration Configures protocol features Main MenuStatus and Counters Port Status ActionsPort Counters System Information Switch Static Configuration Administration ConfigurationDevice Information IP Configuration Change Password Change UsernamePort / Trunk Configuration Port Mirroring Configuration Vlan Configuration Vlan Configure Choose a VlanPort Based VLANs IEEE802.1Q VLANsPage Create a Vlan Group Edit / Delete a Vlan Group Choose Edit or Delete itemPriority Configuration MAC Address Configuration Static MAC Address Add static MAC address Edit static MAC addressDelete static MAC address Filtering MAC Address Edit Filtering MAC addressDelete Filtering MAC address Misc Configuration Port Security MAC Age Interval Broadcast Storm Filtering Max Bridge Transmit Delay Bound Protocol Related Configuration 1.STP STP Enable System Configuration STP Port Configuration Snmp System Options Community Strings Trap Managers Gvrp Lacp Aggregator Setting State Activity Lacp Status Reboot Switch Updating Firmware using the Console Port Page Web Management Function RootWeb Management Home Overview Port status Administrator Port StatisticsSingle port counter screen Switch Settings Basic IP AddressMiscellaneous Settings AdvancedPriority Queue Service settings Protocol Enable Setting Vlan Operation ModeIgmp Theory of Operation Gvrp Garp Vlan Registration Protocol Console Port Information Port Controls TrunkingAggregator Setting Aggregator Information Filter Database Igmp Snooping Message Description QueryClick on Filter Database Port Security MAC Filtering Support Port-based VLANs Ieee 802.1Q Vlan Support Protocol-based VlanVlan Configuration Page Configure port VID settings Port VID PvidIngress Filtering Spanning Tree Priority Parameter Description Port Port Mirroring Snmp Security Manager Trap ManagerTftp Update Firmware Configuration Backup Tftp Restore ConfigurationWeb management select Administrator-TFTP update firmware Tftp Backup Configuration Reset SystemReboot Max Filtering Rate LED Indicators DimensionsWeight Humidity External PowerTroubleshooting „ Cabling