Milan Technology MIL-SM808G manual Max Bridge Transmit Delay Bound

Page 40

4-3-7-4.Max Bridge Transmit Delay Bound

Max bridge transmit delay bound (0,1-4 sec): Limits the packets queuing time in the switch. If enabled, the packets exceeding the queuing time will be dropped. Press the Space key to set the time. Valid values are 1sec, 2sec, 4sec and Off. The default is 1 second when this feature is enabled. This setting does not depend on what values are set in the “Priority Configuration” menu.

Enable Delay Bound: If this parameter is enabled, the “Max bridge transmit delay bound” must also be configured. This item allows you to limit queuing time of the low priority packets in the switch. When the low priority packets exceed the “Max Delay Time” they will be transmitted. Press the Space key to enable or disable this function. By default the Enable Delay Bound is set to OFF.

Max Delay Time: Set the time that low priority packets are queued in the switch. The valid range is 0 to 255 ms. Since the default is OFF, the Max Delay Time is 0. This item must be set if “Enable Delay Bound” is configured.

NOTE: “Max bridge transmit delay bound control” must be enabled before Max Delay Bound is enabled.

Actions->

<Edit>: Configures all items. When finished, pressing ESC returns to the action menu line.

<Save>: Saves all configured values.

<Quit>: Exits this page and returns to previous menu.

36

Image 40

Contents MIL-SM808G Regulatory Approval Table of Contents Technical Specifications Introduction Features Intelligent Management FeaturesPackage Contents Management MethodsConsole and Telnet Management Web-based ManagementSnmp Network Management Hardware Description Front PanelLED Indicators PowerDesktop Installation Rear PanelPower On Network Application Segment ApplicationNetwork Configuration Connecting a Terminal or PC to the Console PortSettings of communication parameters Console MenuProtocol Related Configuration Configures protocol features Main MenuStatus and Counters Port Status ActionsPort Counters System Information Switch Static Configuration Administration ConfigurationDevice Information IP Configuration Change Password Change UsernamePort / Trunk Configuration Port Mirroring Configuration Vlan Configuration Vlan Configure Choose a VlanPort Based VLANs IEEE802.1Q VLANsPage Create a Vlan Group Edit / Delete a Vlan Group Choose Edit or Delete itemPriority Configuration MAC Address Configuration Static MAC Address Edit static MAC address Add static MAC addressDelete static MAC address Edit Filtering MAC address Filtering MAC AddressDelete Filtering MAC address Misc Configuration Port Security MAC Age Interval Broadcast Storm Filtering Max Bridge Transmit Delay Bound Protocol Related Configuration 1.STP STP Enable System Configuration STP Port Configuration Snmp System Options Community Strings Trap Managers Gvrp Lacp Aggregator Setting State Activity Lacp Status Reboot Switch Updating Firmware using the Console Port Page Web Management Function RootWeb Management Home Overview Port status Port Statistics AdministratorSingle port counter screen Switch Settings Basic IP AddressMiscellaneous Settings AdvancedPriority Queue Service settings Protocol Enable Setting Vlan Operation ModeIgmp Theory of Operation Gvrp Garp Vlan Registration Protocol Console Port Information Port Controls TrunkingAggregator Setting Aggregator Information Filter Database Igmp Snooping Message Description QueryClick on Filter Database Port Security MAC Filtering Support Port-based VLANs Ieee 802.1Q Vlan Support Protocol-based VlanVlan Configuration Page Port VID Pvid Configure port VID settingsIngress Filtering Spanning Tree Priority Parameter Description Port Port Mirroring Snmp Security Manager Trap ManagerConfiguration Backup Tftp Restore Configuration Tftp Update FirmwareWeb management select Administrator-TFTP update firmware Reset System Tftp Backup ConfigurationReboot Max Filtering Rate LED Indicators DimensionsWeight Humidity External PowerTroubleshooting „ Cabling