Milan Technology MIL-SM808G manual Parameter Description Port

Page 80

The priority and path cost can be configured for each port. Click the Apply button to modify the configuration.

	Parameter	Description
	Port	A change to the Port Priority affects which port will be the root port.
	Port	The lowest number has the highest priority. The range is 0-255 and
	Priority
	Priority	the default setting for all ports is 128. If you change the value, you

		must reboot the switch.
		Path Cost specifies the path cost of the port that the switch uses to
	Path Cost	determine which ports are the forwarding ports. The lowest
		number becomes the forwarding port. The range is 1-65535 and
		the default value is based on IEEE802.1D
		10Mb/s = 50-600 100Mb/s = 10-60
		If you change the value, you must reboot the switch.

76

Image 80

Contents MIL-SM808G Regulatory Approval Table of Contents Technical Specifications Introduction Features Intelligent Management FeaturesPackage Contents Management MethodsConsole and Telnet Management Web-based ManagementSnmp Network Management Hardware Description Front PanelLED Indicators PowerDesktop Installation Rear PanelPower On Network Application Segment ApplicationNetwork Configuration Connecting a Terminal or PC to the Console PortSettings of communication parameters Console MenuProtocol Related Configuration Configures protocol features Main MenuStatus and Counters Port Status ActionsPort Counters System Information Switch Static Configuration Administration ConfigurationDevice Information IP Configuration Change Password Change UsernamePort / Trunk Configuration Port Mirroring Configuration Vlan Configuration Vlan Configure Choose a VlanPort Based VLANs IEEE802.1Q VLANsPage Create a Vlan Group Edit / Delete a Vlan Group Choose Edit or Delete itemPriority Configuration MAC Address Configuration Static MAC Address Delete static MAC address Add static MAC addressEdit static MAC address Delete Filtering MAC address Filtering MAC AddressEdit Filtering MAC address Misc Configuration Port Security MAC Age Interval Broadcast Storm Filtering Max Bridge Transmit Delay Bound Protocol Related Configuration 1.STP STP Enable System Configuration STP Port Configuration Snmp System Options Community Strings Trap Managers Gvrp Lacp Aggregator Setting State Activity Lacp Status Reboot Switch Updating Firmware using the Console Port Page Web Management Function RootWeb Management Home Overview Port status Single port counter screen AdministratorPort Statistics Switch Settings Basic IP AddressMiscellaneous Settings AdvancedPriority Queue Service settings Protocol Enable Setting Vlan Operation ModeIgmp Theory of Operation Gvrp Garp Vlan Registration Protocol Console Port Information Port Controls TrunkingAggregator Setting Aggregator Information Filter Database Igmp Snooping Message Description QueryClick on Filter Database Port Security MAC Filtering Support Port-based VLANs Ieee 802.1Q Vlan Support Protocol-based VlanVlan Configuration Page Ingress Filtering Configure port VID settingsPort VID Pvid Spanning Tree Priority Parameter Description Port Port Mirroring Snmp Security Manager Trap ManagerWeb management select Administrator-TFTP update firmware Tftp Update FirmwareConfiguration Backup Tftp Restore Configuration Reboot Tftp Backup ConfigurationReset System Max Filtering Rate LED Indicators DimensionsWeight Humidity External PowerTroubleshooting „ Cabling