Milan Technology MIL-SM808G manual STP Port Configuration

Page 43

4-4-1-3.STP Port Configuration

1.PortState: Spanning tree status for each port.

2.PathCost: Specifies the path cost of the port that the switch uses to determine which ports are the forwarding ports. If you change the value, you need to restart the switch for valid value change to take effect.

3.Priority: Specifies the path cost of the port that the switch uses to determine which ports are the forwarding ports. The lowest number is picked as the forwarding port. The range is 1-65535 and the default

value is based on IEEE802.1D standard. The values should be in the range: 10Mb/s = 50-600 100Mb/s = 10-60.

If you change the value, you must reboot the switch to save the value change.

39

Image 43

Contents MIL-SM808G Regulatory Approval Table of Contents Technical Specifications Introduction Intelligent Management Features FeaturesWeb-based Management Package ContentsManagement Methods Console and Telnet ManagementSnmp Network Management Front Panel Hardware DescriptionPower LED IndicatorsRear Panel Desktop InstallationPower On Segment Application Network ApplicationConnecting a Terminal or PC to the Console Port Network ConfigurationConsole Menu Settings of communication parametersMain Menu Protocol Related Configuration Configures protocol featuresStatus and Counters Actions Port StatusPort Counters System Information Administration Configuration Switch Static ConfigurationDevice Information IP Configuration Change Username Change PasswordPort / Trunk Configuration Port Mirroring Configuration Vlan Configuration IEEE802.1Q VLANs Vlan ConfigureChoose a Vlan Port Based VLANsPage Create a Vlan Group Choose Edit or Delete item Edit / Delete a Vlan GroupPriority Configuration MAC Address Configuration Static MAC Address Edit static MAC address Add static MAC addressDelete static MAC address Edit Filtering MAC address Filtering MAC AddressDelete Filtering MAC address Misc Configuration Port Security MAC Age Interval Broadcast Storm Filtering Max Bridge Transmit Delay Bound Protocol Related Configuration 1.STP STP Enable System Configuration STP Port Configuration Snmp System Options Community Strings Trap Managers Gvrp Lacp Aggregator Setting State Activity Lacp Status Reboot Switch Updating Firmware using the Console Port Page Root Web Management FunctionWeb Management Home Overview Port status Port Statistics AdministratorSingle port counter screen IP Address Switch Settings BasicAdvanced Miscellaneous SettingsPriority Queue Service settings Vlan Operation Mode Protocol Enable SettingIgmp Theory of Operation Gvrp Garp Vlan Registration Protocol Console Port Information Trunking Port ControlsAggregator Setting Aggregator Information Message Description Query Filter Database Igmp SnoopingClick on Filter Database Port Security MAC Filtering Support Protocol-based Vlan Support Port-based VLANs Ieee 802.1Q VlanVlan Configuration Page Port VID Pvid Configure port VID settingsIngress Filtering Spanning Tree Priority Parameter Description Port Port Mirroring Snmp Trap Manager Security ManagerConfiguration Backup Tftp Restore Configuration Tftp Update FirmwareWeb management select Administrator-TFTP update firmware Reset System Tftp Backup ConfigurationReboot Humidity External Power Max Filtering Rate LED IndicatorsDimensions WeightTroubleshooting „ Cabling