Milan Technology MIL-SM808G manual Port Mirroring

Page 81

5-4-9. Port Mirroring

The Port Mirroring feature is disabled by default. Selecting enable from the pull down menu will cause the selected traffic from the selected monitor ports to be mirrored to the selected analysis port. Press the Apply button to submit the changes.

Port Mirroring State: Enables or disables the port mirroring function.

Analysis Port: The ports you want to mirror. All source port traffic will be copied to a mirror port. You can select a maximum of 9 source ports in the switch. If you want to disable the function, you must select monitor port to none.

Monitor Rx: Monitors received frames from the port.

Monitor Tx: Monitors transmitted frames from the port.

77

Image 81

Contents MIL-SM808G Regulatory Approval Table of Contents Technical Specifications Introduction Intelligent Management Features FeaturesManagement Methods Package ContentsConsole and Telnet Management Web-based ManagementSnmp Network Management Front Panel Hardware DescriptionPower LED IndicatorsRear Panel Desktop InstallationPower On Segment Application Network ApplicationConnecting a Terminal or PC to the Console Port Network ConfigurationConsole Menu Settings of communication parametersMain Menu Protocol Related Configuration Configures protocol featuresStatus and Counters Actions Port StatusPort Counters System Information Administration Configuration Switch Static ConfigurationDevice Information IP Configuration Change Username Change PasswordPort / Trunk Configuration Port Mirroring Configuration Vlan Configuration Choose a Vlan Vlan ConfigurePort Based VLANs IEEE802.1Q VLANsPage Create a Vlan Group Choose Edit or Delete item Edit / Delete a Vlan GroupPriority Configuration MAC Address Configuration Static MAC Address Add static MAC address Edit static MAC addressDelete static MAC address Filtering MAC Address Edit Filtering MAC addressDelete Filtering MAC address Misc Configuration Port Security MAC Age Interval Broadcast Storm Filtering Max Bridge Transmit Delay Bound Protocol Related Configuration 1.STP STP Enable System Configuration STP Port Configuration Snmp System Options Community Strings Trap Managers Gvrp Lacp Aggregator Setting State Activity Lacp Status Reboot Switch Updating Firmware using the Console Port Page Root Web Management FunctionWeb Management Home Overview Port status Administrator Port StatisticsSingle port counter screen IP Address Switch Settings BasicAdvanced Miscellaneous SettingsPriority Queue Service settings Vlan Operation Mode Protocol Enable SettingIgmp Theory of Operation Gvrp Garp Vlan Registration Protocol Console Port Information Trunking Port ControlsAggregator Setting Aggregator Information Message Description Query Filter Database Igmp SnoopingClick on Filter Database Port Security MAC Filtering Support Protocol-based Vlan Support Port-based VLANs Ieee 802.1Q VlanVlan Configuration Page Configure port VID settings Port VID PvidIngress Filtering Spanning Tree Priority Parameter Description Port Port Mirroring Snmp Trap Manager Security ManagerTftp Update Firmware Configuration Backup Tftp Restore ConfigurationWeb management select Administrator-TFTP update firmware Tftp Backup Configuration Reset SystemReboot Dimensions Max Filtering Rate LED IndicatorsWeight Humidity External PowerTroubleshooting „ Cabling