Milan Technology MIL-SM808G manual Add static MAC address, Edit static MAC address

Page 34

Add static MAC address

1.Press the <Add> key. Then press the <Edit> key on this menu to add a static MAC address.

2.Enter the MAC address to and from which the port should permanently forward traffic, regardless of the device’s network activity.

3.In the Port num field, enter the port number for the device.

4.If tag-based (802.1Q) VLANs are configured, the static addresses are associated with individual VLANs. Enter the VID to associate with the MAC address.

5.Press ESC to go back action menu line, and then select <Save> to save all configured values.

Edit static MAC address

1.Press <Edit> key to modify a static MAC address.

2.Choose the MAC address that you want to modify and then press enter.

3.Press the <Edit> key to modify all the items.

4.Press ESC to go back action menu line, and then select <Save> to save all configured values.

Delete static MAC address

1.Press the <Delete> key to delete a static MAC address.

2.Choose the MAC address that you want to delete and then press enter.

3.After delete static MAC address, you must press <Save> to complete the deletion.

30

Image 34

Contents MIL-SM808G Regulatory Approval Table of Contents Technical Specifications Introduction Features Intelligent Management FeaturesConsole and Telnet Management Package ContentsManagement Methods Web-based ManagementSnmp Network Management Hardware Description Front PanelLED Indicators PowerDesktop Installation Rear PanelPower On Network Application Segment ApplicationNetwork Configuration Connecting a Terminal or PC to the Console PortSettings of communication parameters Console MenuProtocol Related Configuration Configures protocol features Main MenuStatus and Counters Port Status ActionsPort Counters System Information Switch Static Configuration Administration ConfigurationDevice Information IP Configuration Change Password Change UsernamePort / Trunk Configuration Port Mirroring Configuration Vlan Configuration Port Based VLANs Vlan ConfigureChoose a Vlan IEEE802.1Q VLANsPage Create a Vlan Group Edit / Delete a Vlan Group Choose Edit or Delete itemPriority Configuration MAC Address Configuration Static MAC Address Edit static MAC address Add static MAC addressDelete static MAC address Edit Filtering MAC address Filtering MAC AddressDelete Filtering MAC address Misc Configuration Port Security MAC Age Interval Broadcast Storm Filtering Max Bridge Transmit Delay Bound Protocol Related Configuration 1.STP STP Enable System Configuration STP Port Configuration Snmp System Options Community Strings Trap Managers Gvrp Lacp Aggregator Setting State Activity Lacp Status Reboot Switch Updating Firmware using the Console Port Page Web Management Function RootWeb Management Home Overview Port status Port Statistics AdministratorSingle port counter screen Switch Settings Basic IP AddressMiscellaneous Settings AdvancedPriority Queue Service settings Protocol Enable Setting Vlan Operation ModeIgmp Theory of Operation Gvrp Garp Vlan Registration Protocol Console Port Information Port Controls TrunkingAggregator Setting Aggregator Information Filter Database Igmp Snooping Message Description QueryClick on Filter Database Port Security MAC Filtering Support Port-based VLANs Ieee 802.1Q Vlan Support Protocol-based VlanVlan Configuration Page Port VID Pvid Configure port VID settingsIngress Filtering Spanning Tree Priority Parameter Description Port Port Mirroring Snmp Security Manager Trap ManagerConfiguration Backup Tftp Restore Configuration Tftp Update FirmwareWeb management select Administrator-TFTP update firmware Reset System Tftp Backup ConfigurationReboot Weight Max Filtering Rate LED IndicatorsDimensions Humidity External PowerTroubleshooting „ Cabling