5.2Installing HyperCFG
Perform the following steps to install HyperCFG:
Step 1. Copy the HyperCFG executable file from the CD to your hard drive. The filename in the various operating systems is:
–HYPERCFG.exe for DOS
–hypercfg for Linux
–HyperWin.exe for Windows
Step 2. Run the file from the hard drive.
The HyperCFG utility displays. Use the options in Section 5.3, “Using
HyperCFG” to set the RAID configuration and other options.
5.3Using HyperCFG
The following is a list of options for the utility:
•Configuration options
•Drive ID
•Display options
•Miscellaneous options
•Filename
Table 5.1 describes the attributes that you can set for these options.
Hyper Configuration Utility |