Maretron
FPM100 Installation, Unpacking the Box, Graph of Transducer Accuracy vs. Tank Depth
Troubleshooting
Specifications
Install
Pin # Signal Name
Warranty
Maintenance
Configuring the FPM100
Features
Page 8
Page 7
Page 9
Image 8
Page 7
Page 9
Contents
Revision
Page
Revision Copyright 2012 Maretron, LLP All Rights Reserved
Maretron, LLP 9014 N. 23rd Ave #10 Phoenix, AZ
Revision History
FPM100 User’s Manual
Page
Revision
Table of Contents
Table of Figures
Table of Appendices
1.3 Features
1 General
1.1 Introduction
1.2 Firmware Revision
1.4 FPM100 Accessories
1.5 Quick Install
1.6 Theory of Operation
1.6.2 Accuracy of Tank Level Measurement
Figure 1 - Graph of Transducer Accuracy vs. Tank Depth
2 Installation
2.1 Unpacking the Box
2.2 Choosing a Mounting Location
2.3 Mounting the FPM100
2.4 Mounting the Pressure Transducer
2.4.1 Pressure Measurement Applications
2.4.2 Tank Level Measurement Applications
Figure 4 - Fluid Level Measurement with Pressure Transducer
2.5.1 NMEA 2000 Connection
Tank Fitting Ball Valve Pressure Transducer
Figure 6 - NMEA 2000 Connector Face Views
Pin # Signal Name
Figure 7 - Pressure Transducer Connection Diagram
2.5.2 Pressure Transducer Connections
3 Configuring the FPM100
3.1 Configuring Channel Mode
3.2 Configuring a Channel in Pressure/Vacuum Mode
3.2.1 Configuring Instance
3.3 Configuring a Channel in Tank Mode
3.2.2 Configuring Label
3.2.3 Configuring Pressure at 4mA
3.2.4 Configuring Pressure at 20mA
3.3.2 Configuring Pressure at 4mA
3.3.3 Configuring Pressure at 20mA
3.3.4 Configuring Tank Capacity
3.3.5 Tank Levels Calibration
3.3.6 Configuring Tank Number
Figure 8 - Empty Tank Depth and Full Tank Depth Parameters
3.3.5.1.3 Fluid Density
3.3.5.2 Custom Calibration
3.3.8 Configuring Data Damping Period
4 Maintenance
3.3.7 Configuring Tank Type
Troubleshooting Procedure
5 Troubleshooting
Symptom
6 Technical Specifications
Figure 9 - Troubleshooting Guide
Specifications Tank Level Mode
Specifications Pressure/Vacuum Mode
7 Technical Support
Electrical
Mechanical
Environmental
8 Installation Template
Figure 10 - Mounting Surface Template
9 Maretron 2 Year Limited Warranty
Warranty Return Procedure
Appendix A - NMEA 2000 Interfacing
FPM100 NMEA 2000 Periodic Data Transmitted PGNs
Appendix A - NMEA 2000 Interfacing
Page A1
Related pages
All Install page
For the MR-RB51 install the cooling fan as shown for Bose MR-J2S- B
Install for IBM SG24-4817-00
Battery Installation for RCA WHR 100
Configuration Label Installation du logiciel for Samsung LF22NPBHBNP/EN
Installing the Switch Module in the Blade Enclosure for Cisco Systems 3120
User-Installable Features for Fujitsu B6220
Installation for Zanussi ZEBF 290 SI
Step Before Lighting Fireplace After Installation for Hearth and Home Technologies SL-350TRS-CE-D
MIX500 Installation for SoundCraft D-Mix 500
Svenska Huvudsidan Installation Anslutning av monitorn for Samsung DS17BSDS/EDC
What file types are supported for
röstinspelning on Samsung cameras
?
Top
Page
Image
Contents