# cd # umount mnt/initrd | McDATA 8832 specification

IBM BladeCenter Deployment Guide

#mv pcitable.new pcitable

14.Remove driver entries from the module-info file that are associated with the device drivers removed in step #9. Remove all stanzas that begin with the name of a removed device driver (3c59x, eepro100, pcnet32, usb-ohci). For example:

3c59x

eth

"3Com 3c590/3c595/3c90x/3cx980" eepro100

eth

"Intel EtherExpress Pro 100B"

pcnet32

eth

"AMD PCnet32"

15.Remove driver entries from the modules.dep file that are associated with the device drivers removed in step #9. Remove all lines that make reference to the removed device drivers (3c59x, eepro100, pcnet32, usb-ohci).

#cat modules.dep grep –v 3c59x grep –v eepro100 grep –v pcnet32 grep –v usb-ochi> modules.dep.new

#mv modules.dep.new modules.dep

16.Add driver entries present in the drvnet.img pcitable to the initrd.img pcitable file that are associated with the device drivers added in step #10. All entries in the pcitable file must be sorted by PCI ID.

#cat ../mnt/drv/pcitable grep tg3 >> pcitable

#cat ../mnt/drv/pcitable grep e1000 >> pcitable

At this point use an editor or sort script to sort the pcitable information by PCI ID.

17.Add driver entries present in the drvnet.img module-info file to the module-info file that are associated with the device drivers added in step #10. For blades, we’ll be adding the tg3 and e1000 entries which should look something like this:

e1000 eth

"Intel EtherExpress/1000 gigabit" tg3

eth

"Broadcom Tigon3 ethernet driver"

18.Add driver entries present in the drvnet.img modules.dep file to the modules.dep file that are associated with the device drivers added in step #10.

19.Copy the files copied and modified in steps 12-18 to the mounted initrd.img image.

#cp module-info pcitable modules.cgz modules.dep ../mnt/initrd/modules

20.Unmount the initrd.img from the loopback device.

#cd ..

#umount mnt/initrd

21.Compress the initrd.img file.

#gzip -9 tmp.img

#mv tmp.img.gz initrd.img

Version 3.0, 3/10/2006

http://w3-03.ibm.com/support/techdocs/atsmastr.nsf/WebIndex/WP100564

The BladeCenter Deployment Guide is intended as a personal productivity tool. It is not intended to be comprehensive and is provided for

guidance only, on an 'as is basis' without warranty of any kind. Please be aware that its contents have not been certified by IBM.