McDATA 8832 warranty Disable key repeats

Page 10

IBM BladeCenter Deployment Guide

2.Repeating Keystrokes - in order to remove the repeating keystroke problem, you need to check the "Disable key repeats" box and click Save.

Figure 4 Disable key repeats

3.Start a Remote Control of the target blade by clicking on Remote Control under Blade Tasks. Ensure that the media tray and KVM selections are for the target blade)

Figure 5 KVM and Media Ownership

10

http://w3-03.ibm.com/support/techdocs/atsmastr.nsf/WebIndex/WP100564

© 2006 IBM Version 3.0, 3/10/2006

The BladeCenter Deployment Guide is intended as a personal productivity tool. It is not intended to be comprehensive and is provided for

guidance only, on an 'as is basis' without warranty of any kind. Please be aware that its contents have not been certified by IBM.

Image 10

Contents IBM BladeCenter Deployment Guide Part 3 Blades IBM Version 3.0, 3/10/2006 Table of Contents Table of Tables Table of FiguresLinux nofb Introduction Overview BladeCenter SubsystemsContributors BladeCenter Chassis Rear ViewNetwork Configuration Preparatory StepsRemote Control Hints and Tips BladeCenter Management ModuleDisable key repeats Remote Control Window Embedded Fibre Channel Switches SAN ConfigurationDisabling ports on the QLogic switch Storage Connection DiagramUsing SANSurfer GUI Port Properties Disabling IDE devices Configuring the Blades for Remote BootCheck the Boot Order Device Startup OrderHS20 Boot Sequence Configuring the Qlogic HBA Acquiring HBA WWPNs World Wide Port NamesConfiguring the path to the boot LUN Configuring the QLogic HBAEnable Selectable Boot Illustration Testing the path to the boot LUN Save your changesEthernet Port Numbering Verify Disk MediaMAC Address Port Learned Browse MAC Address Table Top SwitchBrowse MAC Address Table Bottom Switch Learned MAC Address PortChange Media Tray Owner Loading the Remote Diskette Linux nofb Multipath Red Hat Installation Kickstart InformationBoot Failure for RH Red Hat Linux AS Broadcom driver installation Fdisk OutputIssues related to Red Hat AS 2.1/3.0 and blades RPM Install of Broadcom Device DriversRev IBM Version 3.0, 3/10/2006 IBM BladeCenter Deployment Guide Changing the Boot Loader Configuration Other Linux Distributions and BladesSerial Over LAN SOL for Blades Rdac Installation and ConfigurationOverview Summary of Linux changes for SOL 72345respawn/sbin/agetty -h ttyS1 19200 vt102Alt-sysrq Alt-sysrq from Linux clientNetdump Alt-sysrq from PuTTYIBM BladeCenter Deployment Guide IBM Version 3.0, 3/10/2006 Broadcom Advanced Control Suite installation List of limitationsBios and Ismp Remote Update of the Firmware on an HS20 or HS40BMC Update for the HS20 8843 and LS20 IBM BladeCenter Deployment Guide Flash the QLogic HBA Bios QLogic HBA FlashRed Hat Boot Diskette Modification Process # mount -o loop drvnet.img mnt/drvIBM Version 3.0, 3/10/2006 # cd # umount mnt/initrd Modify or Create the Post-install Driver Diskette Image Driverdisk --source=nfshost/path/to/26k4970.imgIBM BladeCenter Deployment Guide Appendix A. Firmware Versions Management Module Bios InformationHS20 Model 8832 Firmware Information HS40 Bios HS40 Bios and Ismp InformationLS20 Bios and BMC Information QLogic Firmware InformationBladeCenter Information BladeCenter ComponentsIndex