Lantronix MSS100, 1-T2 manual Warranty Statement

Page 67

Warranty Statement

Lantronix warrants for a period of FIVE YEARS from the date of shipment that each Lantronix MSS Mini Serial Server supplied shall be free from defects in material and workmanship. During this period, if the customer experiences difÞculties with a product and is unable to resolve the problem by phone with Lantronix Technical Support, a Return Material Authorization (RMA) will be issued. Following receipt of a RMA number, the customer is responsible for returning the product to Lantronix, freight prepaid. Lantronix, upon veriÞcation of warranty will, at its option, repair or replace the product in question, and return it to the customer freight prepaid. No services are handled at the customer's site under this warranty.

Lantronix warrants software for a period of sixty (60) days from the date of shipment that each software package supplied shall be free from defects and shall operate according to Lantronix speciÞcations. Any software revisions required hereunder cover supply of distribution media only and do not cover, or include, any installation. The customer is responsible for return of media to Lantronix and Lantronix for freight associated with replacement media being returned to the customer.

Lantronix shall have no obligation to make repairs or to cause replacement required through normal wear and tear of necessitated in whole or in part by catastrophe, fault or negligence of the user, improper or unauthorized use of the Product, or use of the Product in such a manner for which it was not designed, or by causes external to the Product, such as, but not limited to, power or failure of air conditioning.

There are no understandings, agreements, representations or warranties, express or implied, including warranties of merchantability or Þtness for a particular purpose, other than those speciÞcally set out above or by any existing contract between the parties. Any such contract states the entire obligation of Lantronix. The contents of this document shall not become part of or modify any prior or existing agreement, commitment or relationship

The information, recommendation, description and safety notations in this or other documents supplied by Lantronix are based on general industry experience and judgment with respect to such hardware and software. THIS INFORMATION SHOULD NOT BE CONSIDERED TO BE ALL INCLUSIVE OR COVERING ALL CONTINGENCIES.

NO OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING WARRANTIES OF FITNESS FOR A PARTICULAR PURPOSE OR MERCHANTABILITY, OR WARRANTIES ARISING FROM COURSE OF DEALING OR USAGE OF TRADE, ARE MADE REGARDING THE INFORMATION, RECOMMENDATIONS, DESCRIPTIONS AND SAFETY NOTATIONS CONTAINED HEREBY AND IN HARDWARE AND SOFTWARE SPECIFICATION DOCUMENTATION, OR INSTRUCTIONS SUPPLIED BY LANTRONIX.

In no event will Lantronix be responsible to the user in contract, in tort (including negligence), strict liability or otherwise for any special, indirect, incidental or consequential damage or loss of equipment, plant or power system, cost of capital, loss of proÞts or revenues, cost of replacement power, additional expenses in the use of existing software, hardware, equipment or facilities, or claims against the user by its employees or customers resulting from the use of the information, recommendations, descriptions and safety notations supplied by Lantronix. Lantronix liability is limited (at its election) to

(1)refund of buyer's purchase price for such affected products (without interest); (2) repair of such products, or (3) replacement of such products, provided however, that the buyer follows the procedures set forth herein

Warranty claims must be received by Lantronix within the applicable warranty period. A replaced product, or part thereof, shall become the property of Lantronix and shall be returned to Lantronix at the Purchaser's expense. ALL RETURN MATERIAL MUST BE ACCOMPANIED BY A RETURN MATERIAL AUTHORIZATION NUMBER ASSIGNED BY LANTRONIX.

Image 67
Contents Serial Server Installation Guide Part Number Contents Contact Information Troubleshooting Pinouts Iii Page Introduction Protocols TermsConfiguration SoftwareConfiguration Introduction MSS Components InstallationMSS LEDs InstallationInstallation Power-up Diagnostics 4Pinging the MSS Is It Working?Page Getting Started Using an ARP Entry and the Ping Command Using EZWebConIP Address Configuration 1Entering ARP and Ping Unix Using the Serial Console Using a DHCP, BOOTP, or Rarp ReplyControlling Incoming Logins Incoming LoginsEZWebCon Login and Configuration Rlogin Serial Port LoginsOther Incoming TCP/IP Logins Incoming LAT LoginsStarting Outbound Connections Remote Console LoginsTelnet 2 SPX Logout3 LAT Basic Configuration Command SetSystem Passwords Privileged PasswordProtocol Configuration Login Password1 TCP/IP Parameters 2 IPX/SPX Parameters LAT Parameters Serial Port ConfigurationBasic Configuration Serial Port Configuration Change Preferred SPX None Otherwise, only Telnet console port connections are possible Page Incoming Connections Using the MSSSocket Connections 1.1 TCP/IP Socket Connections LAT Connections1.2 IPX/SPX Socket Connections 4Reducing Flow Control Host ApplicationsSession Control Local SwitchInteractive Connections Code Examples8DeÞning Switches Backward and Forward SwitchesDisconnect and Resume Outgoing ConnectionsSession Limits 2.3 SPX 10Connecting with Rlogin2.4 LAT 12Connecting to a ServiceStatus Displays Show Sessions Show Server CharacteristicsShow Services Show Server CountersMssb Emulating a Direct Serial ConnectionMultihost Mode 15Setting the MSS for Multihost Mode 1 Configuring Multihost ModeMultihost Mode Using the MSS Contact Information LANtronix Problems and Error Messages TroubleshootingTable B-1Problems and Error Messages, Etc/services Þle? Bootp TroubleshootingEntering Commands at the Boot Prompt Tftp TroubleshootingFigure B-1BCP Command Examples Entering Commands at the Boot Prompt Troubleshooting Modem Configuration Checklist Page RJ-45 Connector DB25 ConnectorPinouts DSR Data Signal Ready versus CD Carrier Detect Modem WiringDTR Data Terminal Ready Obtaining New Software Updating SoftwareVia FTP Figure D-1Lantronix FTP Session Via a ModemUpdating Software Reloading MSS Software Reloading MSS SoftwareNetWare Figure D-3Reloading Flash ROM using NetWare3 MOP 2 TCP/IPTftp Troubleshooting Flash ROM UpdatesRelative Humidity Limitations Power SpecificationsTemperature Limitations SpecificationsPage Warranty Statement EMC Declaration of ConformityIndex-i IndexIndex-ii Loadhost 4-3, 5-9, B-6Index-iii Telnet 1-4, 5-1