Lantronix MSS100, 1-T2 manual Installation, MSS LEDs

Installation Installation

Four or Þve LEDs are located on the top of the unit. Table 2-1 explains their functions.

	Table 2-1: MSS LEDs
LED	Function
Power	Glows green when power is supplied to the Server
Link	Glows green while the Server is connected properly to a 10BASE-T or
	100BASE-T (MSS100 only) Ethernet network (The Link LED does not
	function for 10BASE2 connections)
100	MSS100 only: glows green to indicate a 100BASE-T Ethernet connection
OK	Blinks yellow, green, or red to indicate Server activity.
Serial	Blinks yellow, green, or red to indicate serial activity.

NOTE: Although a red LED during boot mode usually signals an error, red LED patterns are part of the normal operation of the MSS and are not necessarily indicative of errors or dangerous operation.

2.2 Installation

Figure 2-3 shows an example hardware layout.

Figure 2-3:MSS Network Layout

	2
	MSS
Serial	4
Device	3
	10BASE-T
	Ethernet

2 - 2