Lantronix XPress DR+ manual Additional Documentation, Using This Guide

	Chapter 1: Using This Guide
Chapter 13: Troubleshooting	Describes common problems and error messages and
and Technical Support	how to contact Lantronix Technical Support.
Appendix A: Technical	Lists technical information about the unit.
Specifications
Appendix C: Alternative	Describes other ways to assign an IP address, for
Methods of Assigning an IP	example, though ARP and Telnet.
Address
Appendix D: Binary to	Provides instructions for converting binary numbers to
Hexadecimal Conversions	hexadecimals.
Appendix E: Compliance	Provides the Declaration of Conformity and other
Information	regulatory information.
Appendix F: Warranty

Additional Documentation

The following guides are available on the product CD and the Lantronix web site (www.lantronix.com).

XPress DR+ Quick Start or XPress	Provides the steps for getting the XPress DR+ or
DR+W Quick Start	XPress DR+W up and running.
Com Port Redirector Quick Start	Provides information on using the Windows-based
and Com Port Redirector Online	utility to create a virtual com port.
Help
DeviceInstaller Online Help	Provides information on using DeviceInstaller to
	locate Lantronix devices on the network and
	configure IP addresses.
"Live" tutorials on the Lantronix	Explain and demonstrate assigning an IP address
Web Site	and setting up the unit and the Redirector. See
	http://ts.lantronix.com/tutorials.html.
	Note: The instructions for the UDS products apply
	to the XPress DR+ as well.
Protocol documentation	Provides guides for the protocols, such as Modbus
	Bridge and Multi-Master DF1, which you can load
	on the XPress DR+.

XPress DR+ User Guide 11