Lantronix XPress DR+ manual Setting Description

Page 43

				Chapter 5: Using DeviceInstaller
	Table 5-1. Viewing Current Settings

	Setting			Description

	Name			Configurable field. A name that identifies the XPress DR+.
				Double-click the field, type in the value, and press Enter to
				complete. This name is not visible on other PCs or laptops
				using DeviceInstaller.
	Group			Configurable field. A group name to categorize the XPress
				DR+. Double-click the field, type in the value, and press Enter
				to complete. This group name is not visible on other PCs or
				laptops using DeviceInstaller.

	Comments			Configurable field. Information about the XPress DR+. Double-
				click the field, type in the value, and press Enter to complete.
				This description or comment is not visible on other PCs or
				laptops using DeviceInstaller.

	Device Family			Non-configurable field. Displays the unit’s device family type
				as XPress.
	Type			Non-configurable field. Displays the device type as XPress
				DR+.
	ID			Non-configurable field. Displays the unit's ID embedded within
				the box.
	Hardware Address			Non-configurable field. Displays the unit's hardware (or MAC)
				address.
	Firmware Version			Non-configurable field. Displays the firmware currently
				installed on the XPress DR+.
	Extended Firmware			Non-configurable field. Displays the full version
	Version			nomenclature of the firmware.

	Online Status			Non-configurable field. Displays the unit's status as online,
				offline, unreachable (the XPress DR+ is on a different subnet),
				or busy (the XPress DR+ is currently performing a task).

	Telnet Enabled			Non-configurable field. Displays True. Permits Telnet
				sessions.
	Telnet Port			Non-configurable field. Displays the unit's port for telnet
				sessions.
	Web Enabled			Non-configurable field. Displays True. Permits configuration
				through Web Manager.
	Web Port			Non-configurable field. Displays the unit's port for Web
				Manager configuration.
	Maximum Baud Rate			Non-configurable field. Displays the unit's maximum baud
	Supported			rate. Note: The XPress DR+ may not be running at this rate
				currently.
	Firmware Upgradeable			Non-configurable field. Displays True, indicating the unit's
				firmware is upgradeable as newer versions become available.
	IP Address			Non-configurable field. Displays the unit's current IP address.
				To change the IP address, see Assigning an IP Address on
				page 41.

	Number of COB			Non-configurable field. Displays the number of COB partitions
	partitions supported			supported.

XPress DR+ User Guide

43

Image 43

Contents XPress DR+ User Guide Technical Support Sales Offices Lantronix Corporate HeadquartersDate Rev Comments Contents Configuration Using Web Manager Using DeviceInstallerContents Setup Mode Server Configuration Configuration Using Telnet or Serial Port Setup ModeSetup Mode Channel Configuration Expert Settings Option 5 Setup Mode Advanced SettingsAppendix D Binary to Hexadecimal Conversions 108 Firmware UpgradesMonitor Mode Troubleshooting and Technical SupportFigures Appendix F Warranty 115 Index 116Tables Chapter Description Using This GuidePurpose and Audience Summary of ChaptersAdditional Documentation Using This GuideProduct Description IntroductionXPress DR+ Front IntroductionNetwork Protocols Serial Tunneling Industrial Automation ProtocolsExample of Serial Tunneling XPress DR+ Application ExamplesPort Numbers Addresses and Port NumbersHardware Address IP AddressLantronix Web Manager. See Configuration Using Web Manager Configuration MethodsWhat Must the User Provide? Installation and HardwarePhysically Connecting the XPress DR+ Whats in the Box?XPress DR+ Front Panel Installation and HardwareFront of XPress DR+ Serial InterfaceSerial Screw Terminal Pinout for RS485 2-Wire Screw Terminal Serial ConnectorsRJ45 Serial Connector Pinouts Serial Screw Terminal Pinout for RS422 4-WireDTE, 9-Pin XPress DR+ Female Serial RJ45 Pin RS-232 to Serial RJ45 Cable P/NTypical RJ45 Connector Ethernet Interface SignalsEthernet Interface Reset Switch Power RequirementsMulti-Drop Ethernet Connections RXD Activity LED TXD Activity LED Ethernet Link LED LEDsEthernet Activity LED Status Meaning DimensionsXPress DR+ LED Functions Product Information Label Wall Mount BracketApplication Examples XPress DR+WSerial Tunneling Network Serial Tunneling Infrastructure Ad Hoc NetworkXPress DR+W Ad Hoc XPress DR+W Connection Physically Connecting the XPress DR+WFront Panel Description Typical XPress DR+W ConfigurationXPress DR+W LED Functions Required Information for Initial ConfigurationIP Address Subnet Mask Gateway Installing the XPress DR+W for Initial ConfigurationServer Configuration Option Wlan SettingsOptions Bit Network Mode XPress DR+W onlyBootP/DHCP/AutoIP options Set Gateway IP AddressChange Dhcp Device Name Wlan Configuration OptionChange Telnet Configuration Password Netmask Number of Bits for Host PartNetwork Name Ssid TopologyAdhoc Network Channel Hex Key Type Encryption KeyPassphrase WPA Fixed or Automatic Data Rate WPA2/802.11iTransmission Data Rate Next StepsAssigning an IP Address Using DeviceInstallerInstalling DeviceInstaller To install DeviceInstallerTo view the units current settings Accessing the XPress DR+ Using DeviceInstallerViewing the Current Configuration Using DeviceInstallerSetting Description Supports Dynamic IP Supports ConfigurablePins Supports Http SetupAccessing XPress DR+ Using DeviceInstaller Configuration Using Web ManagerConfiguration Using Web Manager Lantronix Web Manager Network ConfigurationDhcp Host Name Automatic IP Address ConfigurationTo assign an IP address automatically AutoIPTo assign an IP address manually Server ConfigurationStatic IP Address Configuration Default GatewayTo configure the units device server settings Server ConfigurationAdvanced To configure the units host list Host List Configuration0x77FE Server Port MTU Size To configure the channel’s serial settings Channel ConfigurationSerial Settings Retry SettingsChannel Port SettingsFlush Input Buffer Serial to Network Pack ControlFlush Output Buffer Network to Serial To configure a channel’s TCP settings Connection Settings TCPConnect Protocol Connect Mode Passive ConnectionConnect Mode Active Connection Endpoint ConfigurationCommon Options Connection Settings UDPDisconnect Mode To configure a channel’s UDP settingsDatagram Type Datagram ModeDevice Address Table Wlan Configuration XPress DR+W onlyWlan Settings Ad Hoc Network Type To configure the XPress DR+W’s Wlan settingsChannel Wireless Network ConfigurationNetwork Name Ssid Network TypeWEP Options Wireless Network SecurityWPA Options WPA2/802.11i Options Applying SettingsApplying Factory Defaults Advanced SettingsAccessing Setup Mode Configuration Using Telnet or Serial Port Setup ModeSerial Port Connection Configuration Using Telnet or Serial Port Setup ModeTo establish a Telnet connection To exit setup mode Exiting Setup ModeSetup Mode Server Configuration Setup Mode Server Configuration Dhcp Name Channel 1 Option 1 and Channel 2 Option Setup Mode Channel ConfigurationBaudrate Common I/F Mode Setting Binary Hex Interface ModeSetup Mode Channel Configuration Mode OptionPort Numbers Reserved for FlowPort Number Flow Control Option HexConnect Mode Option Connect ModeResponse Incoming ConnectionActive Startup Connection Autostart AutomaticHostlist Directed UDP Modem ModeTo enable the hostlist Datagram TypeMessage Meaning Modem Mode Commands Modem Mode Function CommandAuto Increment Source Port Send the Escape Sequence +++ in Modem ModeRemote IP Address DisConnMode Disconnect Mode OptionDisconnect Mode Options Remote PortPack Control Flush Mode Buffer FlushingOption Send Characters DisConnTime Inactivity TimeoutPacking Interval Trailing CharactersTelnet Terminal Type Channel Port PasswordWlan Settings XPress DR+W Only Send CharactersTopology 0=Infrastructure, 1=Adhoc 0 ? WEP WEP64 or 13 WEP128 bytes and limits the number of key TX Data rate 0=fixed, 1=auto fallback 1 ? Enable Power Management Disable Monitor Mode at bootup Setup Mode Advanced SettingsExpert Settings Option ARP Cache timeout in secondsHttp Port Number Security Settings OptionEnable alternate MAC Setup Mode Advanced SettingsDisable Port 77FE Hex Disable SnmpDisable Telnet Setup Disable Tftp Firmware UpgradeDefault Settings Option Topology AdHoc Network Name Expert SettingsSecurity Settings Wlan Settings XPress DR+W onlyROM File Firmware UpgradesUsing Tftp Graphical User Interface Obtaining Firmware Reloading FirmwareFirmware Upgrades Using Tftp Command Line InterfaceTo recover firmware Firmware Upgrades Monitor Mode Commands Monitor ModeEntering Monitor Mode Using the Serial Port Entering Monitor Mode Using the Network PortG0, G1, ....,Ge, Gf Monitor ModeCommand Command Name Function Monitor Mode CommandsResponse Meaning Command Response CodesProblems and Error Messages Troubleshooting and Technical SupportProblems and Error Messages Problem/Message Reason SolutionTroubleshooting and Technical Support XPress DR+ User Guide 101 Technical Support Europe, Middle East, and Africa Technical SupportXPress DR+ and XPress DR+W Specifications Appendix a Technical SpecificationsXPress DR+W Wireless Specifications Appendix a Technical SpecificationsCategory Ieee 802.11b/g Lantronix P/N Description Appendix B Lantronix Cables and AdaptersApplications AutoIP Appendix C Alternative Methods of Assigning an IP AddressAppendix C Alternative Methods of Assigning an IP Address ARP and TelnetTo assign a temporary IP address Scientific Calculator Appendix D Binary to Hexadecimal ConversionsConverting Binary to Hexadecimal Conversion TableAppendix D Binary to Hexadecimal Conversions Emissions Immunity Appendix E Compliance InformationDeclaration of Conformity Electromagnetic Emissions and Immunity XPress DR+Radio Appendix E Compliance InformationElectromagnetic Emissions and Immunity XPress DR+W USA Federal Communications Commission FCC Notice XPress DR+W Regulatory InformationCanada Industry Canada Notice Antenna Notice Europe R&TTE Directive 99/5/EC, Wireless NoticeExposure of Humans to RF Fields Australia & New Zealand Wireless Notice Appendix F Warranty Index