Lantronix ETS8PS, ETS16PS, ETS32PR, ETS16PR Unix Host Troubleshooting, Area to Check Explanation

Page 36

Printing on the ETS

Unix Host Troubleshooting

Table 5-1. TCP Troubleshooting

Area to Check

Explanation

The ETS IP address

Telnet to the ETS using the name in the host file

and name are entered

and verify that the ETS name is resolvable and

in the host file.

that the ETS is reachable via the network.

 

 

Jobs that appear in

From within the LPC administrative utility, enter

the host queue reach

these commands to clear and reset the host

the ETS

queue:

 

abort queue

 

clear queue

 

enable queue

 

start queue

36

ETS Installation Guide

Image 36
Contents ETS Installation Guide Lantronix Corporate Headquarters Technical SupportSales Offices Disclaimer and Revisions Contents LAT Configuration Specifications ContentsIntroduction Supported Serial ProtocolsRS-232 RS-423How to Use This Manual IntroductionInstallation Etsp Product DescriptionsEtsps Front Panels ETS8PS/ETS16PS LEDsInstalling the Etsp InstallationETS16PS Back Panel Etspr Product Descriptions ETS16PR Front PanelInstalling the Etspr ETS32PR Front PanelEtspr LEDs Sample Etspr Network Layout ETS16PR shown Installation Configuration Methods Using a Web Browser Etspr modelsGetting Started EZWebConTCP/IP Configuration Incoming LoginsUsing EZWebCon Console TerminalUsing a Directed Ping Packet ARP and Ping on UnixWas the Installation Successful? Using a BOOTP, DHCP, or Rarp ReplyUsing the Command Line Interface Using the ETS Console Server ExampleUsing the ETS Define the MenusEnable Menu Mode Configure SwitchesUsing Menus 10. Configuring SwitchesTCP Configuration Serial Tunnel ExampleUDP Configuration Multi-port Serial Tunnel ConfigurationComm Port Redirector Services Printing on the ETSLPR Printing LPR on Windows 2000, XP,To enable LPR support, install Print Services for Unix Printing on the ETSPrinting on the ETS Printing on the ETS Local Define Service ETSHPLaserjet port Enable LPR on Windows NT 3.5.1 and later Printing on the ETS LPR on Windows 95/98 LPR on Unix HostsLPR on AIX Hosts Adding /etc/hosts EntryLPR on HP Hosts LPR on SCO Unix HostsRtel Functionality Answer the questions that followUnix Host Troubleshooting Area to Check ExplanationNetWare Configuration Configure your ETSNdps Printing NDS Print Queues Obtain an NDS LicenseNetWare Administrator Quick Setup Print Queues NetWare ConfigurationFrom the Menu Bar, select Tools Print Services Quick Setup Pconsole Print QueuesNetWare Host Troubleshooting Use the Show Protocols NetWare AccessCode Meaning Remedy NetWare Configuration LAT Configuration LAT Host TroubleshootingPrinting Directly to a Port LAT Configuration Translating LAT Error CodesAppleTalk Configuration Macintosh ServicesBitronics AppleTalk ZonesAppleTalk Host Troubleshooting AppleTalk ConfigurationDLC Configuration for LAN Manager DLC ConfigurationETS Configuration Host ConfigurationContact Information Technical Support Europe, Middle East, and AfricaTroubleshooting Power-up TroubleshootingDhcp Troubleshooting Bootp TroubleshootingTroubleshooting Rarp Troubleshooting Entering Commands at the Boot PromptSET Bootp Enabled, Disabled SET Dhcp Enabled, DisabledFlush NVR FlashTroubleshooting SET Rarp Enabled, Disabled SET Secondary ipaddressSET Software filename Show ServerEthernet Connector RJ45 Serial ConnectorsPinouts RJ45 to DB25Pinouts Figure C-3. Pinouts of RJ45-DB25 ConnectionsFigure C-5. Wire Splicer RJ45 to DB9Updating Software Choosing the Right Software FileObtaining Software Via the Web Via FTPReloading Software Reloading SequenceUpdating Software NetWare MOPTroubleshooting Flash ROM Updates TftpSpecifications Power InformationEnvironmental Limitations Frequently-Used Commands Server CommandsConventions Frequently-Used Commands NopasswordBanner Port Commands Zero Counters ALLProtocol Commands SHOW/MONITOR PortNetware Etherii Compliance and Warranty Information Declaration of ConformityWarranty Compliance and Warranty Information