Lantronix ETS8PS, ETS16PS, ETS32PR, ETS16PR manual Code Meaning Remedy

NetWare Configuration

	Area to Check		Explanation
	The DSTree,		Type Show Protocol NetWare NDS. This
	DSContext, and		command shows the tree and the context that
	DSLicense		you have configured, a failure code, and an NDS
			error code for each server.
			DSTree is the directory service tree on which the
			ETS is located. DSContext is the context where
			the ETS is located; it must match the context on
			the file server (The DSContext must be of the
			following form: ou=fruit.o=exotic). DSLicensed
			should be yes.
	Printer and queue		It may take a few minutes for the changes to
	changes have		propagate. If the ETS doesn’t attach, reboot the
	propagated through		ETS.
	the NDS tree
		Table 6-3. NDS Errors from the File Server
Code		Meaning		Remedy
0xfffffda7		Object could not be		Check the ETS server name, DScontext,
		found in the given		and DStree to ensure the printer server is
		context		set up correctly with PCONSOLE.
0xfffffda5		Requested attribute		Use PCONSOLE to ensure that the ETS
		could not be found		has associated printers and the printers
				have associated queues.
0xfffffd69		DS Database is		An administrator is probably updating the
		locked		database. Wait a few minutes and issue
				the Set Protocol NetWare Reset
				command.
0xfffffd63		Invalid password		The password for the print server object
				under PCONSOLE must match the ETS
				login password. If the login password on
				the ETS is left as the default (access),
				there should be no password for the print
				server object.
0xfffffd54		Secure NCP		Turn down the NCP packet signature
		violation		level so that it is not required.
		Table 6-4. NDS Errors from the File Server
Bit		Meaning		Remedy
1		Server out of		Turn the ETS off, wait a few seconds, and
		memory		turn it back on. Disable unused protocols
				and/or remove fileservers without print
				queues from the NetWare access list.
2, 3		Unexpected		Report the problem to Lantronix
		response from file		Technical Support.
		server
4		No printers found for		Ensure that there are printers for the
		the ETS		ETS, and the printer names match the
				service names on the ETS.
5		No printer queue		Ensure that the printers have associated
		found		queues.
6		Login failed		Ensure there is a print server object
				configured with the same name as the
				ETS.

40 ETS Installation Guide