6: NetWare Configuration
The EZWebCon configuration software is the easiest way to configure the ETS. The following sections cover print configuration methods for NetWare hosts.
Note: The ETS needs an IP address before you can use EZWebCon. See
TCP/IP Configuration on page 16 for instructions.
This chapter explains creating NDS print queues with NetWare Administrator and with the PCONSOLE Quick Setup option. To create NDS print queues, you must be running NetWare version 4.x with NDS capabilities.
If you are running NetWare versions 2.x, 3.x, or version 4.x with bindery emulation, you may configure bindery print queues using QINST (bindery only) or PCONSOLE. For more information, see the NetWare chapter of the Device Server Reference Manual located on the
NDPS Printing
Lantronix Terminal and Print Servers support Novell's NDPS for printing using the Novell NDPS Gateway. For instruction on setting up NDPS, refer to your Novell documentation. Lantronix also provides information on setting up NDPS in our FAQs on our support web site (http://www.lantronix.com/support).
NDS Print Queues
Obtain an NDS License
If you wish to create NDS print queues, you must read and complete an NDS registration form via one of the following methods:
Using a
Send email to support@lantronix.com. You will receive a blank registration form that can be completed and returned to Lantronix.
If you don’t have Internet access, contact a Lantronix technical support representative for assistance. Contact information is provided in A:Contact Information.
Configure your ETS
1. License NDS on your ETS using the string obtained from Lantronix.
Figure 6-1. Licensing NDS
Local>> DEFINE PROTOCOL NETWARE DSLICENSE licensestring
2. Define the directory service tree in which the ETS is located.
ETS Installation Guide | 37 |