Lantronix Ethernet Send Characters, Telnet Terminal Type, Channel Port Password, Wlan Settings

Page 63

Setup Mode: Channel Configuration

DisConnTime (00:00) ?:

To disable the inactivity timeout, enter 00:00. Range is 0 (disabled) to 5999 seconds (99 minutes, 59 seconds). The default setting is 0.

Send Characters

Enter up to two characters in hexadecimal representation in sendchar.

SendChar 1 (00) ? _

SendChar 2 (00) ? _

If the unit receives a character on the serial line that matches one of these characters, it sends the character immediately, along with any awaiting characters, to the TCP connection. This action minimizes the response time for specific protocol characters on the serial line (for example, ETX, EOT). Setting the first sendchar to 00 disables the recognition of the characters. Alternatively, the unit can interpret two characters as a sequence (see Pack Control on page 61). The default setting is 00.

Telnet Terminal Type

This parameter displays only if you enabled the terminal type option in Disconnect Mode. With this option enabled, you can use the terminal name for the Telnet terminal type. Enter only one name.

With terminal type option enabled, the unit also reacts to the EOR (end of record) and binary options, useful for applications like terminal emulation to IBM hosts.

Channel (Port) Password

This parameter displays only if the channel (port) password option is enabled in Disconnect Mode. With this option enabled, you can set a password on the serial port. Blank by default.

WLAN Settings

Without adequate protection, a wireless LAN is susceptible to access by unauthorized users. As such, WiBox features the WPA security standard, based on IEEE802.11i and IEEE802.1X. WEP is provided for backwards compatibility and interaction with older devices.

To modify WLAN settings, select 4 WLAN from the Change Setup menu.

Enable WLAN

Enable the Ethernet or the Wireless interface. When WLAN is enabled, the Ethernet interface is disabled.

Enable WLAN (Y) ? _

Topology

Select Infrastructure (ESS) mode or Adhoc (IBSS) mode. Infrastructure mode communicates with Access Points. Ad Hoc mode communicates only with other clients.

WiBox2100E User Guide

63

Page 62 Page 64
Image 63
Page 62 Page 64
Contents WiBox2100E User Guide Technical Support Sales Offices Lantronix Corporate HeadquartersContents Contents Setup Mode Server ConfigurationSetup Mode Advanced Settings Compliance List of TablesSerial Tunneling Infrastructure Network Example List of FiguresUsing This Guide Purpose and AudienceChapter Summary Additional Documentation Using This GuideIntroduction ApplicationsName Model Part Numbers Application Examples Serial Tunneling NetworkIntroduction Serial Tunneling Infrastructure Ad Hoc NetworkWiBox with Ethernet Configuration MethodsProtocol Support Ad Hoc WiBox ConnectionIP Address Wlan SettingsAddresses and Port Numbers Hardware AddressDB9M DTE Serial Connector Serial Connector PinoutsWBX2100E Network Interface RS-485 2-Wire PinoutsEthernet Connector Pinouts LEDsWiBox LEDs Technical Specifications IP Address Subnet Mask Gateway Quick StartRequired Information Hardware Address 00-20-4aQuick Start Installing and Configuring the WiBoxWEP Enabled Y/N? WEP Key 64 bit or 128 bit? WPA Enabled Y/N WPA Key Type hex or passphrase?Syntax is SetZone IP address zone abbreviation WEP To install the DeviceInstaller Using Device InstallerTo view the WiBox’s configuration settings Viewing the Current ConfigurationMaximum Baud Rate Firmware UpgradeableRate Supports Wired Ethernet WebPortQuick Start Accessing Web-Manager through a Web Browser Web-Manager ConfigurationWeb-Manager Configuration Network ConfigurationDhcp Host Name Automatic IP Address ConfigurationSelect Obtain IP address automatically Auto-IPSelect Use the following IP configuration Server ConfigurationStatic IP Address Configuration Ethernet ConfigurationTo configure the WiBox’s device server settings Server ConfigurationAdvanced Http Server Port Hostlist ConfigurationTo configure the WiBox’s hostlist CPU Performance ModeHost Information Channel 1 and Channel 2 ConfigurationSerial Settings Retry SettingsProtocol Port SettingsDisable Serial Port ChannelFlush Input Buffer Serial to Network Pack ControlAt Time of Disconnect Connection Settings TCPFlush Output Buffer Network to Serial Connect ProtocolConnect Mode Active Connection Connect Mode Passive ConnectionCommon Options Endpoint ConfigurationDisconnect Mode Connection Settings UDPDatagram Type Datagram ModeWlan Configuration To configure the WiBox’s Wlan settingsDevice Address Table Network Type Select Infrastructure or Ad Hoc Channel Wireless Network ConfigurationWireless Network Security Network NameAdvanced Settings WEP OptionsWPA Options Applying Defaults Updating SettingsTo establish a Telnet connection Telnet or Serial Port Setup Mode ConfigurationAccessing Setup Mode Telnet ConnectionSerial Port Connection Exiting Setup ModeTelnet or Serial Port Setup Mode Configuration To exit Setup ModeIP Address Setup Mode Server ConfigurationServer Configuration Option Network ModeNetmask Number of Bits for Host Part Change Telnet Configuration PasswordSetup Mode Server Configuration Set Gateway IP AddressDhcp Name Setup Mode Channel Configuration Channel 1 OptionBaudrate Common I/F Mode Setting Binary Hex Interface ModeSetup Mode Channel Configuration Mode OptionPort Numbers Reserved for Connect ModePort Number Flow Control Option HexResponse Connect Mode OptionConnect Mode Options Incoming ConnectionIncoming Connection ResponseActive Startup Manual Connection Address Example Manual ConnectionHostlist To enable the hostlistAutostart Automatic ConnectionDatagram Type Modem ModeNumeric Response 11. Modem Mode MessagesMessage Meaning Full VerboseAuto Increment Source Port Send the Escape Sequence +++ in Modem ModeModem Mode Function Command Modem Mode CommandsRemote Port Disconnect Mode OptionDisconnect Mode Options Remote IP AddressPack Control Flush Mode Buffer FlushingSend Characters DisConnTime Inactivity TimeoutPacking Interval Trailing CharactersTelnet Terminal Type Channel Port PasswordWlan Settings Send CharactersNetwork Name Ssid Adhoc Network ChannelSecurity Transmission Data Rate Fixed or Automatic Data RateEnable Power Management Setup Mode Advanced Settings Expert Settings OptionTCP Keepalive time in seconds Http Port Number ARP Cache timeout in secondsDisable Monitor Mode at bootup CPU PerformanceSecurity Settings Disable Echo Ports Disable Port 77FE HexDisable Web Server Disable Web SetupGenerally, one of two situations applies Default Settings Channel 1 ConfigurationChannel 2 Configuration Channel Security Expert SettingsSecurity Settings Enable Power ManagementExit Configuration Mode Monitor Mode Commands Monitor ModeEntering Monitor Mode via the Serial Port Entering Monitor Mode via the Network PortG0, G1, ....,Ge, Gf Monitor ModeCommand Response Codes Response MeaningROM File Using Tftp Graphical User InterfaceUpdating Firmware Obtaining Firmware Reloading FirmwareTo download new firmware from a computer Network UpgradeUsing Tftp Command Line Interface Updating FirmwareSyntax is SetZone IP address zone abbreviation Wlan Country SettingWireless Bridging Configuring the WiBox in Bridging ModeMethod Troubleshooting Problem/Message Reason Solution TroubleshootingDiagnostic LED States Problems and Error MessagesLater, there is only one setting for Caps Lock is not on WiBox2100E onlyTechnical Support Europe, Middle East, and Africa Technical SupportScientific Calculator Binary to Hexadecimal ConversionsConverting Binary to Hexadecimal Conversion TableBinary to Hexadecimal Conversions Compliance Information ComplianceCompliance Regulatory InformationUSA Federal Communications Commission FCC Notice Canada Industry Canada NoticeExposure of Humans to RF Fields Europe R&TTE Directive 99/5/EC, Wireless NoticeAustralia & New Zealand Wireless Notice Antenna NoticeCompliance Warranty

Ethernet specifications

Lantronix Ethernet technology is a pivotal component in modern networking, facilitating seamless communication and connectivity across a multitude of devices. Renowned for its reliability and innovation, Lantronix offers a diverse range of products and solutions that cater to various industries, from healthcare to industrial automation.

One of the standout features of Lantronix Ethernet devices is their ability to enable remote access and management of equipment. This is particularly beneficial in scenarios where physical access is limited or impractical. With secure remote management, organizations can monitor, control, and configure devices from virtually anywhere, streamlining operations and reducing downtime.

Lantronix Ethernet products utilize advanced technologies such as Serial to Ethernet conversion, which allows legacy serial devices to communicate over an IP network. This feature is essential for companies looking to modernize their infrastructure without the need for a complete overhaul of existing equipment. By bridging the gap between old and new technologies, Lantronix ensures that organizations can extend the lifespan of their investments.

Another key characteristic of Lantronix Ethernet solutions is their robustness and security. Designed to withstand various environmental conditions, these devices are suitable for deployment in harsh environments, making them ideal for industrial applications. Additionally, robust encryption protocols and security features help safeguard sensitive data, ensuring that only authorized personnel can access the system.

Scalability is also a significant advantage of Lantronix Ethernet technology. As businesses grow and evolve, their networking needs often change. Lantronix products are designed to scale easily, allowing organizations to add new devices and functionality without disrupting existing operations. This flexibility enables businesses to adapt to new challenges and opportunities as they arise.

Moreover, Lantronix places a strong emphasis on ease of integration. With extensive support for various communication protocols and interfaces, their Ethernet solutions can be quickly and effectively integrated into existing systems, minimizing deployment time and maximizing efficiency.

In conclusion, Lantronix Ethernet technology represents a comprehensive solution for modern networking needs. With features such as remote management, serial communication capabilities, security, scalability, and ease of integration, Lantronix stands out as a leader in the connectivity landscape, empowering businesses to optimize operations and enhance productivity. Whether in industrial environments or remote locations, Lantronix Ethernet solutions deliver the reliability and performance required in today’s fast-paced digital world.
Top Page Image Contents