Intellinet Network Solutions 530361 Show Authentication Status Dialog Select to display

Page 20

Tx Rate: There are several options in the drop-down menu: “Auto” and a range of speeds from “1 Mbps” to “54 Mbps.” When “Auto” is selected, the device automatically chooses the most suitable transmission rate. The higher the data rate designated in the network, the shorter the distance allowed between the adapter and the wireless stations.

When the wireless mode is “802.11 B Only,” the maximum data rate is 11 Mbps (11b), making only “Auto,” “1 Mbps,” “2 Mbps,” “5.5 Mbps” and “11 Mbps” available as options.

Enable Tx Burst: This enables the adapter to deliver better throughput in the same period and environment.

Enable TCP Window Size: The TCP window is the amount of data a sender can deliver on a particular connection before it gets an acknowledgment back from the receiver that it has gotten some of it. When the router or AP the adapter is connecting to has set up the TCP window, you can enable the parameter to meet the data size for the router or AP connection. The larger the TCP window, the better the performance.

Fast Roaming at [-70] dBm: To fast roam to a nearby network without interrupting the wireless connection (such as a multimedia application or a voice call), you can set this parameter. The adapter will fast roam when the receive sensitivity (signal strength) is below the value entered.

Show Authentication Status Dialog: Select to display.

Select Your Country Region Code: Channel availability varies from country to country; for example, USA (FCC) channels are 1-11, while Europe (ETSI) channels are 1-13.

Enable CCX: Cisco Compatible Extensions, for radio monitoring and fast roaming.

Turn on CCKM: During normal operation, LEAP-enabled client devices mutually authenticate with a new AP by performing a complete LEAP authentication, including communication with the main RADIUS server.

When a wireless LAN is configured for fast re-association, however, LEAP-enabled client devices roam from one access point to another without involving the main server. Using Cisco Centralized Key Management (CCKM), an access point configured to provide wireless domain services (WDS) takes the place of the RADIUS server and

20CONFIGURATION

Page 19 Page 21
Image 20
Page 19 Page 21
Contents Model Page Reorient or relocate the receiving antenna FCC CertificationsEU Countries Intended for Use FCC RF Radiation Exposure StatementTTE Compliance Statement Table of contents Installation XP procedure is similar for Windows 98SE/Me/2000/2003/VistaVista, a Found New ConfigurationWhen the Finish screen appears, click Finish RaConfig as Configuration utility OptionNetwork Profile Configuration Profile Configuration Profile Authentication and Encryption Security Change is recommendedConfiguration Configuration User login to the LAN approved or denied 802.1x Setting/CertificationRadius Client Radius Server Windows802.1x Setting/CA Server Server Name Enter the authentication server name Wireless Mode Select from the drop-down menuStatistics AdvancedTo this mode. This mode is also the default setting Show Authentication Status Dialog Select to display WMM Wps configuration AboutAutomatically select the AP Select to activate Configuration Switch to AP Mode to activate the SoftAP functionSoftAP Ssid The Ssid upWireless Mode Selects the wireless mode supported by the AP Security setting Open No authentication is needed within the wireless networkSoftap Access control Mac table Event logStatistics Specifications General
Top Page Image Contents