Intellinet Network Solutions 530361 To this mode. This mode is also the default setting

Page 19

to this mode. This mode is also the default setting.

802.11 B only: Though the adapter is compatible with both 802.11g and 802.11b wireless stations, if there are only 802.11b wireless

stations in the network, you can set the adapter to this mode. Ad Hoc Wireless Mode: When the adapter is set in Ad Hoc (Peer to

Peer) mode, you can designate the wireless connection mode for the Ad Hoc network.

Only B: Though the adapter is compatible with both 802.11g and 802.11b wireless stations, if there are only 802.11b wireless stations in the network, you can set the adapter to this mode.

B/G Mixed: If you have a mix of 802.11b and 802.11g wireless stations in your network, it is recommended that the adapter be set to this mode. This mode is also the default setting.

Only G: Though the adapter is compatible with both 802.11g and 802.11b wireless stations, if there are only 802.11g wireless stations in the network, you can set the adapter to this mode.

Wireless Protection: If you have a mix of 802.11b and 802.11g wireless stations in the network, it’s recommended that you enable the protection mechanism, which can decrease the rate of data collisions between 802.11b and 802.11g wireless stations. When the protection mode is enabled, the throughput of the adapter will be a little lower.

Auto: Depending on the status of the network, this automatically disables/enables the protection mode.

On: Always enables the protection mode.

Off: Always disables the protection mode.

CONFIGURATION 19

Image 19
Contents Model Page FCC Certifications Reorient or relocate the receiving antennaTTE Compliance Statement FCC RF Radiation Exposure StatementEU Countries Intended for Use Table of contents XP procedure is similar for Windows 98SE/Me/2000/2003/Vista InstallationWhen the Finish screen appears, click Finish ConfigurationVista, a Found New Option RaConfig as Configuration utilityNetwork Profile Configuration Profile Configuration Change is recommended Profile Authentication and Encryption SecurityConfiguration Configuration Windows User login to the LAN approved or denied802.1x Setting/Certification Radius Client Radius Server802.1x Setting/CA Server Advanced Server Name Enter the authentication server nameWireless Mode Select from the drop-down menu StatisticsTo this mode. This mode is also the default setting Show Authentication Status Dialog Select to display WMM About Wps configurationAutomatically select the AP Select to activate Ssid The Ssid up ConfigurationSwitch to AP Mode to activate the SoftAP function SoftAPWireless Mode Selects the wireless mode supported by the AP Open No authentication is needed within the wireless network Security settingSoftap Access control Event log Mac tableStatistics General Specifications