Dell K806N, K789N Settings continued, Description, Available Settings, Default Setting, Operation

Table 7. Settings (continued)

Description	Available Settings	Default Setting
Battery Saving Mode	[Disabled] [10%] [20%] [30%]...[100%]	Disabled
	The UPS output is turned off in five minutes if the
	UPS is on battery and output power is below the
	selected level.
On Battery Notice Delay	[0] [1s] [2s]...[99s]	0s
	The UPS issues a “UPS on battery” notice in the
	specified number of seconds after the UPS starts to
	discharge the batteries.
Site Wiring Fault Alarm	[Enabled] [Disabled]	Disabled for 208V
		models; Enabled for
		all others
External Battery Module (EBM)	[0] [1]	0
	See “Configuring the UPS for an EBM” on page 44.
Charger	[Enabled] [Disabled]	Enabled
	If Enabled, batteries charge normally.
	If Disabled, the battery charger is off.
Battery Charge % to Restart	[0%] [10%] [20%] [30%]...[100%]	0%
	When enabled, automatic restart is made when the
	battery charge state reaches the selected level. If set
	to 0, the feature is disabled.
Battery Low Alarm	[Immediate] [2 min] [3 min] [5 min]	3 min
	If you select a value, the battery low alarm triggers
	when the set amount of backup time
	(approximately) remains in the batteries.
Automatic Battery Tests	[Enabled] [Disabled]	Enabled
	See “Running Automatic Battery Tests” on page 45.

38 Operation