Dell J716N, K789N, K788N Control Screens, describes the available control screens, Description

Control Screens

Table 6 describes the available control screens.

Table 6. Control Screens

Control Screens	Description
Battery Test	Schedule Battery Test: yes Cancel Battery test: no
	Starts a manual battery test.
	See “Testing Batteries” on page 53.
Reset Error State	Reset Alarms: yes no
	Manually clears any latched alarms, such as bad battery detected or DC Bus
	OV/UV.
	If a bad battery alarm was also active, reset the battery test status to “Not
	Tested.”
Load Segments	Load segment 1: on off
	Load segment 2: on off
	These on/off commands override automatic load segment on/off controls made by
	the Automatic Start Delay and Automatic On Battery Shutdown settings. See
	“Configuring Load Segments” on page 41.
Restore Factory Settings	Restore Factory Settings: yes no
	Available only in Standby mode.
	Restoring the factory settings:
	S	Returns all user-configurable EEPROM settings to default factory settings
	S	Resets all pending on/off commands
	S	Clears the Event Log and resets all time stamps
	S	Resets the battery test status
	S	Initiates the Self Diagnostics test

Operation 35