3Com 3C840 manual Default Bridge Mode

Default Bridge Mode				5 - 10
for remote site connections							5 - 4
for the LAN		5 - 3
introduction		5 - 1
MAC-Encapsulated Routing							5 - 6
monitoring		5 - 11
testing 5 - 11
configuring bridging for the LAN
adding a bridge network						5 - 3
deleting a bridge network						5 - 4
modifying a bridge network							5 - 4
configuring IP RIP on the LAN
advanced RIP configuration options									4 - 5
local site (LAN) RIP 4 - 5
configuring IP routing
adding a local IP network						4 - 3
configuring IP for the remote site connection												4 - 7
configuring IP RIP on a remote site									4 - 10
configuring IP static and framed routes										4 - 11
deleting a local IP network							4 - 4
enabling	4 - 2
introduction		4 - 1
IP address
validation 4 - 12
IP RIP configuration on the LAN								4 - 5
IP testing (PING)			4 - 14
modifying a local IP network							4 - 4
monitoring		4 - 14
configuring IP static and framed routes
adding a framed IP route to a remote site											4 - 11
adding a static IP route to the LAN									4 - 11
configuring IPX RIP and SAP
local site (LAN) RIP and SAP							9 - 10
remote site RIP and SAP					9 - 11
configuring IPX static and framed routes
adding framed IPX route to a remote site											9 - 6
adding static IPX route to the local site										9 - 5
configuring IPX static and framed services
adding a framed IPX service to a remote site												9 - 9
adding a static IPX service to a local site										9 - 8
connection
event log	11 - 16
traffic/error counters				11 - 7
controlling
SNMP access		2 - 4
TFTP access		2 - 6
controlling login and Telnet access								2 - 1
adding a login			2 - 2
deleting a login			2 - 2
conventions	2
notice icons, About This Guide								2
text, About This Guide					3
counters