3Com 3C840 manual Remote 840 Panel, Features, OfficeConnect Remote

1-10CHAPTER 1: OVERVIEW

OfficeConnect	All LED and status information can be found on the front panel of the
Remote 840 Panel	unit, while the power jack and ports are located on the back of the unit.
Features
Front Panel	Below is a representation of the front panel of your unit:

Figure 1–4OfficeConnect Remote 840 Front Panel

Table 1–1LED definitions

LED	Status	Meaning
Alert	FLASHING RED	When software is initializing
Power	STEADY GREEN	When power is applied to the unit
SDSL Link Status	OFF	No signal detected
	FLASHING ORANGE	The unit is attempting to acquire
		synchronization with the CO equipment.
	STEADY GREEN	Link is up.
	FLASHING GREEN	When data is being sent over the link.
LAN Status (4)	STEADY GREEN	When a client is connected to the
		corresponding port on the hub.

A table of LED operation is provided in Chapter 3 of the OfficeConnect Remote 840 SDSL Router Installation Guide in the section “Installing

The OfficeConnect Remote 840.”