Configuring IP RIP | Access the RIP options for the WAN through Configuration > Remote |
on a Remote Site | Sites > IP. |
1Select a defined remote site connection from the list and click Modify. Keep clicking Next until you advance to the IP Modify screen.
2You can select the RIP version to be either Broadcast, Broadcast & Listen, Listen or None. Broadcast refers to when routing information packets are sent out to the network, and Listen refers to the OfficeConnect Remote 840 receiving routing information packets from remote sources.
If you are using address translation (PAT/NAT), you must set routing to either Listen or None. This is because you have set up a private network and therefore do not want to be broadcasting information to other routers.
3You can then choose between RIPV1 (version 1) or RIPV2 (version 2) for your routing information protocol.
