3Com 3C840 manual Local IPX Network These steps, Follow these steps, Configuration Audit

Using the Configuration Audit E-13

55 Press the Save Configuration button on the sidebar to save the settings you just entered.

Step 5: Configuring a	If you are setting up the OfficeConnect Remote 840 to route IPX, follow
Local IPX Network	these steps.

1From the OfficeConnect Remote 840 home page, select Configuration > Local Site (LAN) > IPX > Add.

2Enter a name for the network, the IPX address of the network, and the frame type of the network running on the LAN.

3Check the Enable IPX box.

4Click the Add button to add this defined IPX network.

5Press the Save Configuration button on the sidebar to save the settings you just entered.

Step 6: Configuring a	If you are setting up the OfficeConnect Remote 840 to bridge traffic,
Local Bridge Network	follow these steps:

1From the OfficeConnect Remote 840 home page, select Configuration > Local Site (LAN) > Bridge > Add.

2Enter a name for the network and check the Enable Bridging box.

3Click Add to add this defined bridge network.

If you plan to bridge IP packets instead of routing them, you need to disable IP Forwarding. To do this:

1From the OfficeConnect Remote 840 Manager home page, select Global > IP > IP Settings.

2Uncheck the IP Forwarding checkbox, and press the Submit button. At this point, you will momentarily lose connectivity.

3To re-establish the connection, press the Stop button on the Web browser, and then press the Reload button.

Using the	When you have finished the basic configuration, run the Configuration
Configuration	Audit by visiting the OfficeConnect Remote 840 home page. Select Tools
Audit	> Configuration Audit.