3Com 3C840 manual Bridge Firewall, Check the Enable MAC Encapsulated Routing box to enable MAC

Bridge Firewall 5-7

the routed protocols configured by the profile (i.e., IP and/or IPX) will be sent using the appropriate bridged encapsulation. If the configured Network Service is PPP, the packets will be encapsulated in BRCP.

MAC-Encapsulated Routing is configured on the Remote Sites General screen.

To access the Remote Sites General screen:

1Go to the OfficeConnect Remote 840 home page and select Configuration > Remote Sites (WAN).

2Select a defined remote site and click Modify. This will access the Remote Sites General Modify screen, containing the following fields:

3	Check the Enable MAC Encapsulated Routing box to enable MAC
	Encapsulated Routing for this remote site.
4	Click Modify to save the change.
Bridge Firewall	The OfficeConnect Remote 840 can be configured for simultaneous
	bridging and routing. IP routing is configured if IP forwarding is enabled
	(see “Enabling IP Routing” in Chapter 4.)