3Com 3C840 manual

IP 11-9

and the network address assigned to the connection. IP and IPX WAN network names incorporate the name of the remote site profile.

Below is an example of a network status table. IP Routing Table:

The IP routing table contains the list of all IP routes known by the OfficeConnect Remote 840. To view the IP routing table, go to the OfficeConnect Remote 840 Manager home page and select Monitor > Routes and Services > IP Routes.

Routes that were put in the table when a network came up have the protocol type of LOCAL. STATIC routes are those that have been configured statically. The protocol type of RIP indicates routes that were learned from IP RIP information exchange with other routers. The interface indicates whether the network is accessible from the LAN (eth:1) or WAN (atm:1 or hdlc:1) interface.

ARP Table The Address Resolution Protocol (ARP) table displays the list of IP addresses and their associated hardware addresses that have been learned using ARP. The table is built dynamically. To view this table, go to the OfficeConnect Remote 840 Manager home page and select Monitor > Networks > IP > ARP Table.