3Com 3C840 manual Networks NAT/PAT Port Assignments screen. Only those

Monitoring 6-5

Monitoring	If PAT is used, the active port mappings are shown in the Monitor >
	Networks > NAT/PAT > Port Assignments screen. Only those
	mappings for the specified Remote Site will be displayed. This screen
	shows the active port mappings for both TCP and UDP connections. Each
	entry consists of the public and the private ports, the remote address and
	port number, and the value of the inactivity timer.
	For both NAT and PAT, the active address mappings are shown in the
	Monitor > Networks > NAT/PAT > Mapped Addresses screen. Only
	those mapping for the specified Remote Site will be displayed. This screen
	shows the active private addresses, the associated public address, and the
	number of active TCP and UDP connections. When PAT is configured,
	each entry will have the same public address.
	For more information on these monitoring screens, see “Monitoring the
	OfficeConnect Remote 840” in Chapter 11.