3Com 3C840 manual Remote Site Management, Divided into the following parts

3

REMOTE SITE MANAGEMENT

Introduction	This chapter provides an overview on managing remote site profiles using
	the web browser based OfficeConnect Remote 840 Manager. If you need
	information on setting up or initially configuring the unit, see the
	OfficeConnect Remote 840 SDSL Router Installation Guide. This section is
	divided into the following parts:
	■	“Remote Site Overview”
	■ “Managing a Remote Site Profile”
	■ “Configuring Network Service Information (PPP / RFC 1483 / RFC
		1490)”
	■	“Configuring ATM Information”
	■	“Configuring Protocol Parameters”
	■ “Monitoring Remote Site Connections”
Remote Site	To set up connections over the WAN, a remote site profile must be
Overview	created and edited for each remote location you want to connect to.
	With this profile, you specify ATM virtual circuit or Frame Relay DLCI
	information, protocols, and addresses that determine the method of
	connection and communication to the remote site.

You first need to add a remote site profile, and then you modify the profile to include WAN connection and network information.

The following list summarizes the necessary information.

■ WAN — Network Service (PPP / RFC 1483/RFC 1490) information, and ATM Virtual Channel (VC) or Frame Relay (DLCI) information

■ IP — IP addresses, address translation tables, static routes, and RIP usage.