3Com 3C840 manual Remote site configuration, Then press the Save Configuration button

E-12APPENDIX E: CONFIGURATION (NON-SETUP WIZARD) OF THE OFFICECONNECT REMOTE 840

You cannot use an unnumbered Local IP WAN Address and have PAT enabled.

6	If you are routing IPX, press the Next button to proceed to the IPX
	Modify screen. If you are not routing IPX, press Modify to complete
	the remote site configuration.
Step 4: Configuring 1	If you are routing IPX, complete the entries in this page. Otherwise,
the Remote Site IPX	press the Modify button to complete your remote site configuration,
Network Information	and then press the Save Configuration button.

2Select the option in the IPX WAN Network Address box.

■Select Unnumbered or, if the remote site administrator provided an IPX address for the WAN connection, select Numbered and then enter the address.

■To automatically learn IPX RIPs and SAPs, set the IPX Routing option to Both.

3Check the Enable IPX checkbox.

4Press the Modify button to finish the configuration of the remote site.