3Define the Route by entering the following fields:
■Network Address — The address of the network.
■Gateway Network — The address of the router that joins the networks.
■Gateway Node Address — The hardware address of the gateway node.
■Metric — The number of routers
■Tick — A tick represents how far away the destination is for a data packet (in seconds).
4Click Submit. To clear the fields, click Reset.
5To delete a route from your configuration, select the route and click Delete.
Adding a Framed IPX | To add, modify, or delete a framed route to a Remote Site, follow these |
Route to a Remote | steps: |
Site (WAN) |
|
1Select Configuration > Remote Sites (WAN).
2Select the remote site to modify, and click Modify.
3Continue clicking Next to advance through the ATM Modify, IP Modify, IP Advanced Modify screens to get to the IPX Modify screen.
4Click Framed Routes.
5Click Add to define the following parameters: