3Com 3C840 manual Configuring IP RIP, On the LAN, Necessary, Advanced RIP

Configuring IP RIP on the LAN 4-5

Configuring IP RIP	RIP is utilized as a means of communicating routing information between
on the LAN	routers. This is done to keep the routers updated on information.

Local Site (LAN) RIP The RIP options for the LAN can be accessed through Configuration > Local Site > IP. Select a defined local site connection from the list and click Modify/Delete, which accesses the IP Modify/Delete screen, containing the following fields:

	You can then select the RIP version to be either None, RIPV1, or RIPV2.
	You can also modify the Advanced RIP parameters. You should not need
	to change any of these parameters from the defaults, but you can if
	necessary.
Advanced RIP	Select a local site connection from the list on the main IP screen, and click
Modification Options	Advanced.